4D Clear Aligner Resin
Lodden · 4D Clear Aligners
A resin for printing clear aligners directly — the aligner itself is printed from the file, with no model and no heat-formed plastic sheet. The lab saves model printing, plastic sheets and trimming, and each step of the plan is produced as its own aligner straight from the design. This resin needs a strong, long final cure, so make sure the curing unit is up to it. Processing, finishing and patient instructions follow the manufacturer’s instructions.
Key features
- The aligner is printed directly — no model and no thermoformed sheet
- Saves the model prints, the plastic sheets and the trimming
- Each step of the plan is produced as its own aligner from the file
- High-intensity post-cure — make sure the curing unit matches
Technical specifications
- Type
- photopolymer resin for directly printed clear aligners
- Print layer height
- 0.1 mm
- Wash
- IPA (isopropyl alcohol) — 4 + 3 min (rough, then fine)
- Post-curing
- single-sided · 60 min at 100–200 mW/cm² · 20–30 min at 200–500 mW/cm²
Data as published by the manufacturer. Details vary by configuration — talk to us.
More in this category
Model ResinA resin for printing dental models on a 3D printer — the digital alternative to pouring stone. The model is built straight from the scan file, with no mixing, pouring or waiting for it to set.
Temporary Restoration ResinA resin for 3D printing temporary restorations — interim crowns and bridges printed straight from the digital design.
Permanent Crowns ResinA ceramic-filled resin for 3D printing permanent crowns — for the definitive restoration, not the interim one.
Fixed Hybrid Dentures ResinA resin for printing fixed hybrid dentures — full-arch implant restorations in which teeth and gums form one piece, screwed onto the implants.
Contact us
A site visit, measurements and an initial plan with a price range — no obligation.
Leave a detailed message
Even outside business hours — we will get back to you.