Laboratory

HeyMill W19A five-axis wet mill for metal and ceramic restorations: titanium, cobalt-chrome, glass-ceramics and high-performance polymers on one machine.LoddenLaboratory HeyMill D18A five-axis dry mill that runs without an external air compressor — for zirconia, PMMA, PEEK and wax: crowns and bridges, temporaries and frameworks.LoddenLaboratory HeyMill W16A five-axis hybrid milling machine — wet and dry in one unit, for zirconia, resin, wax, glass-ceramics, titanium, pre-milled blanks and soft metals.LoddenLaboratory HeyTemp TSA series of three zirconia sintering furnaces — from a fast cycle of about an hour to a standard cycle of up to 150 units.LoddenLaboratory HeyTemp T5MA compact porcelain furnace for finishing firings in the lab: glass-ceramic crystallization, glazing, porcelain firing, corrections and staining.LoddenLaboratory HeyTemp T6IA press furnace for glass-ceramic restorations pressed from ingots — which also works as a porcelain furnace thanks to its many built-in programs.LoddenLaboratory D-Series 3D PrinterA DLP 3D printer for the lab and clinic — the D158 and D160 — for printing models, aligner models, surgical guides and temporary restorations.LoddenLaboratory CD-X3A 3 L ultrasonic cleaning bath for 3D-printed parts — it removes uncured resin from surfaces and crevices before final post-curing.LoddenLaboratory UV02A post-curing unit for 3D-printed parts with three wavelengths — 365, 385 and 405 nm — each controlled independently.LoddenLaboratory INOX Chairside 3D PrinterA chairside resin 3D printer built for nano-filled dental materials — part of the INOX system for printing permanent restorations in the clinic.INOXLaboratory INOX N1 LED & Nitrogen Curing MachineAn LED post-curing unit with a nitrogen system for printed parts and resin work — nitrogen displaces oxygen from the chamber so the surface cures too.INOXLaboratory