CD-X3
Lodden
An ultrasonic cleaning bath for 3D-printed parts — it removes uncured resin from surfaces and crevices before final post-curing. Sound waves create tiny bubbles in the liquid that reach grooves and corners a brush cannot. One press starts automatic cleaning, and there are also normal and pulse programs, heating and a timer. It comes with a basket and a lid. According to the manufacturer’s warning label, alcohol and other flammable liquids must not be placed directly in the bath.
- Supply, installation and staff training by JK Dent
- Full warranty
- Service and maintenance — response within 24 hours
Key features
- One-press AUTO cleaning — dual acoustic wave with degassing
- Three operating modes: Degas, Normal and Pulse
- Liquid heating with set and actual temperature display
- Timer in minutes and seconds
- 3 L stainless steel tank with mesh basket and lid
Technical specifications
- Type
- ultrasonic cleaning bath for printed parts
- Capacity
- 3 L
- Frequency
- 40 kHz
- Ultrasonic power
- 120 W
- Heating power
- 100 W
- Tank size
- 240 × 135 × 100 mm
- Unit size
- 265 × 160 × 225 mm
- Operating modes
- Degas · Normal · Pulse, plus AUTO one-press cleaning
- Net weight
- 3.2 kg
Data as published by the manufacturer. Details vary by configuration — talk to us.
More in this category
HeyMill W19A five-axis wet mill for metal and ceramic restorations: titanium, cobalt-chrome, glass-ceramics and high-performance polymers on one machine.
HeyMill D18A five-axis dry mill that runs without an external air compressor, for zirconia, PMMA, PEEK and wax — crowns and bridges, temporaries and frameworks.
HeyMill W16A five-axis hybrid milling machine — wet and dry in one unit, for zirconia, resin, wax, glass-ceramics, titanium and pre-milled blanks.
HeyTemp TSA series of three zirconia sintering furnaces — from a fast cycle of about an hour to a standard cycle for a large number of units.
Contact us
A site visit, measurements and an initial plan with a price range — no obligation.
Leave a detailed message
Even outside business hours — we will get back to you.