Equipment
Dental Zirconia
8 products in this category
ZirArt 4D Multilayer Zirconia DiscsLodden ZirArt 4D series zirconia discs for milling in CAD/CAM systems. The manufacturer’s top multilayer series: 8 gradient layers, a flexural strength of 700 to 1300 MPa, and shades following VITA16 plus seven more. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.
ZirArt 3D Multilayer Zirconia DiscsLodden ZirArt 3D series zirconia discs for milling in CAD/CAM systems. The discs are multilayer: the manufacturer states 5 to 6 layers with a gradient shade transition, a flexural strength of 750 to 1200 MPa, and shades following the VITA16 key plus four more. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.
HT Series Zirconia DiscsLodden HT series zirconia discs for milling in CAD/CAM systems. The manufacturer states a flexural strength of 1350 MPa, which suits the series to posterior work and longer bridges where strength comes before translucency. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.
ST Series Zirconia DiscsLodden ST series zirconia discs for milling in CAD/CAM systems. The manufacturer states 43%% translucency — a balance of strength and appearance that suits combined anterior and posterior work. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.
SHT Series Zirconia DiscsLodden SHT series zirconia discs for milling in CAD/CAM systems. The manufacturer states 46%% translucency, one step clearer than the ST series, for work where appearance matters more. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.
UT Series Zirconia DiscsLodden UT series zirconia discs for milling in CAD/CAM systems. The manufacturer states 49%% translucency — the highest of these series — for anterior restorations where light transmission is the point. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.
Zirconia Colouring LiquidsColouring liquids for zirconia before sintering. The white disc is dipped or brushed, and the shade is set before the furnace — so the colour sits inside the material rather than in an outer layer that wears away.
Special Effects Coloring Liquid KitA kit of effect liquids for zirconia: cervical shades, incisal translucency and internal characterisation. It is meant for anterior work, where a single tooth has to blend among natural ones rather than read as a flat unit.
Contact us
A site visit, measurements, and a first plan with a price range. No commitment.
Leave a detailed message
Even outside business hours — we will get back to you.