Equipment, instruments and materials
The full catalog.
Everything we actually supply and install — by category. Equipment is installed, connected, acceptance-tested and covered by a service contract.
S500An advanced dental unit for daily work and delicate procedures, including work under a microscope. It brings the chair, dentist station, assistant station and light into one workspace.
ST-D307A complete dental unit with eco-leather upholstery, for diagnosis, treatment and surgical procedures: chair, dentist station, assistant station, cuspidor and light in one system.
E200BA complete dental unit on an independent column: the dentist station and light are mounted on a separate column, alongside the patient chair and assistant station — all in one system for the clinic.
ST-D303A complete dental unit with seamless upholstery, for diagnosis, treatment and surgical procedures: chair, dentist station, assistant station, cuspidor and light in one system.
E200CA complete dental unit with the dentist station on the water unit: the dentist station and light attach to the unit beside the chair, alongside the assistant station — all in one system for the clinic.
CBCT-1030 ProOne imaging system that shows the teeth, jaws and jaw joints in 3D (CBCT), in a panoramic view and in cephalometric images — for diagnosis and for planning treatments such as implants and root canals.
F220 Phosphor Plate ScannerA phosphor plate (PSP) scanner for intraoral X-rays: the plate is exposed like film, then the scanner reads it and sends the digital image to the clinic computer.
Lead ApronA radiation-protective apron with a lead or lead-equivalent layer that covers the front of the body of anyone who stays in the room during dental X-rays.
G4 Pro (DOM4000E)A dental surgical microscope with a built-in 4K camera, for work under magnification in root canal treatment, restorations and surgery.
DOM 3000D-4k PROA dental surgical microscope with a built-in 4K camera, for diagnosis and treatment in root canal work, implants, gum treatment and esthetic restorations.
MCS 3000AA dental microscope on a mobile stand for root canal treatment, restorations and surgery, with several magnification steps.
AEOLUS-750LA suction motor with a built-in water–air separator that powers the dental unit’s suction, drawing off saliva, blood, debris and turbine aerosol.
AEOLUS-370X Portable SuctionA mobile suction unit on castors, with a strong suction hose and a saliva ejector, for a treatment chair with no connection to central suction.
New
IMPNAVA dynamic navigation system for dental implant surgery that guides the drill in real time against the implant plan made on the CT scan.
Aurora-SA combined dental laser on a mobile cart: Er:YAG plus diode wavelengths, for hard tissue, soft tissue and bone. The manufacturer lists a wide range of indications.
iLaser I ProA desktop diode laser with three wavelengths, for soft-tissue surgery, gum treatment, root canal work and peri-implant procedures.
iLaser I PlusA desktop diode laser with three wavelengths, for soft-tissue surgery, root canal and gum treatment, photobiomodulation and whitening.
iLaser IA desktop single-wavelength diode laser for soft-tissue surgery, gum treatment and root canal disinfection — cutting and coagulating in the same pass.
iLaser IIA pen-style diode laser for soft-tissue surgery, gum treatment and root canal disinfection — with no desktop unit and no cable.
B1A piezoelectric surgery unit for bone cutting, implant site preparation, sinus lift and extractions, with working modes for root canal and gum work as well.
Smart IA pen-style electronic local-anesthesia injector with several injection modes, for a dental cartridge.
Smart IIA light pen-style electronic local-anesthesia injector with computer-controlled constant flow (CCLAD) and several speed modes.
OPUS CartA hygiene and prophylaxis unit on a mobile cart that combines an ultrasonic scaler for removing calculus with an air-powder polisher for stain and biofilm — one console for both jobs.
Air PolisherAn air-powder polisher that connects directly to the dental unit’s high-speed handpiece connection, for removing stain and biofilm (plaque).
IMIX-M3A benchtop capsule mixer (amalgamator) that mixes amalgam capsules at a set time and speed — a uniform mix that does not depend on hand technique.
LED Whitening Light on a Mobile StandAn LED light for in-office teeth whitening, on a mobile stand with an adjustable arm. It is a blue light source used alongside a professional whitening gel.
Tanda Pro 18LA Class B benchtop steam autoclave for sterilizing solid and hollow instruments, wrapped and unwrapped, and porous materials. In the Class B programs, air is removed by vacuum before steam enters, and each cycle ends with vacuum drying.
Sterilization Pouch SealerA heat sealer for sterilization reels: it seals instruments into pouches before the autoclave, so they stay sterile until opened at the chair.
Water DistillerA countertop water distiller that makes distilled water in the clinic — mainly for the autoclave and for other equipment that requires it.
Handpiece Oiling MachineAn automatic oiler for turbines and contra-angles: it drives oil and compressed air through the handpiece’s inner channels before sterilization.
HeyMill W19A five-axis wet mill for metal and ceramic restorations: titanium, cobalt-chrome, glass-ceramics and high-performance polymers on one machine.
HeyMill D18A five-axis dry mill that runs without an external air compressor, for zirconia, PMMA, PEEK and wax — crowns and bridges, temporaries and frameworks.
HeyMill W16A five-axis hybrid milling machine — wet and dry in one unit, for zirconia, resin, wax, glass-ceramics, titanium and pre-milled blanks.
HeyTemp TSA series of three zirconia sintering furnaces — from a fast cycle of about an hour to a standard cycle for a large number of units.
HeyTemp T5MA compact porcelain furnace for finishing firings in the lab: glass-ceramic crystallization, glazing, porcelain firing, corrections and staining.
HeyTemp T6IA press furnace for glass-ceramic restorations pressed from ingots, which also works as a porcelain furnace thanks to its many built-in programs.
D-Series 3D PrinterA DLP 3D printer for the lab and clinic, for printing models, aligner models, surgical guides and temporary restorations.
CD-X3An ultrasonic cleaning bath for 3D-printed parts — it removes uncured resin from surfaces and crevices before final post-curing.
UV02A post-curing unit for 3D-printed parts with three wavelengths, each controlled independently.
INOX Chairside 3D PrinterA resin 3D printer built for nano-filled dental materials — part of the INOX system for printing permanent restorations in the clinic.
INOX N1 LED & Nitrogen Curing MachineAn LED post-curing unit with a nitrogen system, for printed parts and resin work — nitrogen displaces oxygen from the chamber so the surface cures too.
New
Nanoksa G-Plus High-Performance Polymer DiscA high-performance polymer disc for milling on a CAD/CAM machine, for permanent restorations on implants — bridges, full-arch work and crowns.
Nanoksa G-Plus Resin for Permanent RestorationsA 3D printing resin for permanent restorations: veneers, inlays, onlays and single crowns. It is the printable form of Nanoksa G-Plus, which also comes as a milling disc.
PEKK-ALLIED Resin for Prosthetic FrameworksA 3D printing resin for prosthetic frameworks: denture bases, partial denture frameworks and implant-supported structures such as All-on-4 and All-on-6. According to the manufacturer it belongs to the PEKK family of polymers.
Nanoksa Direct Clear Aligners ResinA resin for directly printing clear aligners on a 3D printer — with no printed models and no heat-formed plastic sheets.
Nanoksa Flexible Denture ResinA 3D printing resin for flexible partial dentures — removable prostheses that replace several missing teeth and flex with the movements of the mouth.
Nanoksa Gingiva KitA light-cured gingival composite kit for building pink tissue in implant work and partial dentures, and for characterizing acrylic dentures.
Nanoksa LAB CompositeA light-cured laboratory composite for indirect restorations: crowns and bridges, inlays, onlays and veneers.
Nanoksa StainsCharacterization stains for direct and indirect composite restorations and for masking discoloration — eight colors in ultra-fine-tip syringes.
Dual Cure Composite Luting CementA composite luting cement for final cementation of crowns, bridges, implant restorations, inlays, onlays, veneers and posts. It sets under light and chemically, so it cures even where light cannot reach.
Bond Enhancers and PrimersSurface primers that improve the bond between composite or resin cement and the restoration surface — porcelain, metal, plastic and resin. Four primers, each for a different surface.
Nanoksa Gingiva body syringeThe Body paste of the Nanoksa Gingiva composite: the layer that builds the volume of the pink tissue and its base shade, over the opaque.
Nanoksa Gingiva Modifier SyringeThe modifier gel of the Nanoksa Gingiva system: the characterization layer over the Body, for matching the artificial gum shade to the patient’s own gum.
Nanoksa Gingiva Opaque ModifierAn opaque modifier for the Nanoksa Gingiva system: it changes the shade of the masking layer itself, under the pink tissue.
Nanoksa Gingiva OpaqueThe gingival opaque of the Nanoksa Gingiva system: the first masking layer that covers the framework — metal, zirconia or polymer — before the pink tissue is built.
Broken Instrument Removal KitA kit for retrieving a file or instrument that has broken inside the root canal: tiny instruments expose the end of the fragment, and a gripping head holds it and draws it out.
ZirArt 4D Multilayer Zirconia DiscsMultilayer zirconia discs for CAD/CAM milling, with many layers that grade in shade, translucency and strength for monolithic anterior and posterior work.
ZirArt 3D Multilayer Zirconia DiscsMultilayer zirconia discs for CAD/CAM milling, for crowns, bridges and monolithic work. The layers grade in shade, translucency and strength.
HT Series Zirconia DiscsStrong zirconia discs for CAD/CAM milling, for posterior crowns, long bridges, full-arch restorations and implant work where strength comes first.
ST Series Zirconia DiscsZirconia discs for CAD/CAM milling that balance strength and translucency, for a wide range of restorations.
SHT Series Zirconia DiscsHigh-translucency zirconia discs for CAD/CAM milling, for monolithic restorations where appearance leads.
UT Series Zirconia DiscsUltra-translucent zirconia discs for CAD/CAM milling, for esthetic monolithic restorations — anterior crowns, veneers and inlays/onlays.
Zirconia Coloring LiquidsWater-based coloring liquids for white zirconia, infiltrated into the milled restoration before sintering to set the shade on the classic VITA scale.
Special Effects Coloring Liquid KitA kit of effect liquids for characterizing zirconia before sintering, for monolithic restorations and gum-colored ceramic parts.
Lithium Disilicate DiscsLithium disilicate glass-ceramic discs for milling on open CAD/CAM systems, for esthetic restorations — crowns, veneers and inlays/onlays.
Lithium Disilicate Press IngotsLithium disilicate ingots for the heat-press technique, for veneers, inlays/onlays and anterior and posterior crowns.
CAD Lithium Disilicate BlocksLithium disilicate glass-ceramic blocks for CAD/CAM milling of veneers, inlays/onlays, crowns and short bridges.
Lithium Disilicate Block — No SinteringLithium disilicate glass-ceramic blocks for CAD/CAM milling that need no sintering, for single restorations the patient needs quickly. The block is supplied tooth-colored, and according to the manufacturer it is designated for immediate restorations.
Hybrid Ceramic Discs and BlocksHybrid ceramic for chairside CAD/CAM milling with no sintering, for crowns, inlays/onlays and veneers, as the manufacturer states. It is a composite of resin and ceramic filler.
PMMA DiscsPMMA discs for CAD/CAM milling of temporary crowns and bridges, dentures, splints and surgical guide molds.
PEEK DiscsPEEK (polyether ether ketone) discs for CAD/CAM milling of non-metal frameworks — a light, strong engineering polymer.
Wax DiscsWax discs for CAD/CAM milling of wax patterns for crowns and bridges — for pressing and lost-wax casting — and of diagnostic models.
Model ResinA resin for printing dental models on a 3D printer — the digital alternative to pouring stone. The model is built straight from the scan file, with no mixing, pouring or waiting for it to set.
Temporary Restoration ResinA resin for 3D printing temporary restorations — interim crowns and bridges printed straight from the digital design.
Permanent Crowns ResinA ceramic-filled resin for 3D printing permanent crowns — for the definitive restoration, not the interim one.
Fixed Hybrid Dentures ResinA resin for printing fixed hybrid dentures — full-arch implant restorations in which teeth and gums form one piece, screwed onto the implants.
Denture Base ResinA resin for 3D printing denture bases — the part that carries the teeth and rests on the ridge, printed straight from the digital design.
Flexible Dentures Base ResinA resin for 3D printing flexible denture bases — for dentures whose base needs to flex, not just carry the teeth.
Tray ResinA resin for printing custom impression trays — a tray built to the patient’s arch instead of a stock tray.
Gingiva Mask ResinA resin for printing a gingiva mask — a replica of the soft tissue around implants or preparations on the working model.
D-Cast ResinA castable resin for printing patterns that burn out in the furnace — the digital counterpart of wax carving in the lost-wax technique.
Implant Model Resin (High Precision)A resin for printing high-precision implant models — models that carry digital analogs at the implant positions as scanned.
Surgical Guide ResinA resin for printing implant surgical guides — they carry the planned implant position, angle and depth into the mouth.
Ortho Model ResinA resin for printing orthodontic models — study models, a model for every step of an aligner plan and models for appliance fabrication.
4D Clear Aligner ResinA resin for printing clear aligners directly — the aligner itself is printed from the file, with no model and no heat-formed plastic sheet.
Hard Splint ResinA resin for printing hard splints — stabilization splints, night guards for teeth grinding (bruxism) and splints for jaw-joint (TMJ) therapy.
Soft Splint ResinA resin for printing soft splints — for splints and night guards where wearing comfort comes before rigidity.
Indirect Bonding Tray (IBT) ResinA resin for printing indirect bonding trays (IBT) in orthodontics — a tray that transfers every bracket in the arch in one step.
NatureArt Stain and Glaze PasteStain and glaze pastes for color characterization and finishing of ceramic restorations, from the base shade through effects to the final gloss in the furnace.
NatureArt All-Ceramic Stain & Glaze SetA stain and glaze kit for all-ceramic restorations: NatureArt pastes in base and effect shades, with liquids and brushes, in one box.
Lab Light-Curing Gingiva CompositeA light-curing composite system for building the gum part of restorations: many shades in syringes, opaquers included, with a primer and working liquids.
Zirconia Milling Burs for Amann GirrbachZirconia milling burs for Amann Girrbach mills, DC-coated: six tools from bulk removal to fine detail and flat surfaces.
Zirconia Milling Burs for Sirona MC X5Zirconia milling burs for the Sirona inLab MC X5: three DC-coated tools, from bulk removal to fine detail.
Zirconia Milling Burs for ArumZirconia milling burs for Arum mills: three DC-coated tools for milling zirconia restorations.
Zirconia Milling Burs for imes-icore 350iZirconia milling burs for the imes-icore CORiTEC 350i: three DC-coated tools, from bulk removal to fine detail.
Lithium Disilicate Milling Burs for RolandDiamond-grit milling burs for lithium disilicate on Roland DWX mills: four tools, from rough shaping to a pointed tip for detail.
Lithium Disilicate Milling Burs for vhf N4+Diamond-grit milling burs for lithium disilicate on the vhf N4+: three tools for glass-ceramic restorations.
Lithium Disilicate Milling Burs for Ivoclar PM7Diamond-grit milling burs for lithium disilicate on the Ivoclar PrograMill PM7: four tools.
Lithium Disilicate Milling Burs for YenadentDiamond-grit milling burs for lithium disilicate on Yenadent mills: three tools.
Fully-Sintered Diamond Burs HPFully sintered diamond burs with an HP shank for lab work — for grinding and polishing, and according to the manufacturer especially for metal.
Electroplated Diamond Burs HPElectroplated diamond burs with an HP shank, for grinding and polishing ceramics in the lab.
Diamond DiscsDiamond discs for cutting, separating and shaping in the lab, on a screw mandrel.
Tungsten Carbide Burs HPTungsten carbide burs with an HP shank for shaping and cutting in the lab, in round, inverted-cone, cylinder and taper shapes.
Tungsten Carbide Cutters HPTungsten carbide cutters with an HP shank, large heads and a cross-cut pattern, for stock removal and rough shaping in the lab.
Ceramic-Bonded Diamond Grinding BursCeramic-bonded diamond grinding burs for grinding and shaping zirconia, lithium disilicate and ceramics in the lab.
Diamond Polishers for Zirconia and All-CeramicsDisc-shaped diamond polishers for zirconia, lithium disilicate and all-ceramic restorations in the lab.
Mounted SandpaperMounted sandpaper rolls for smoothing and finishing in the lab — the step between shaping with cutting tools and polishing.
Polishing BrushesPolishing brushes and wheels on mandrels for the last finishing steps in the lab — polishing, cleaning and bringing up the shine.
Hard Z CutterA ceramic cutter made of nano-grade zirconia for grinding, finishing and polishing ceramics, acrylic, resin and zirconia in the lab, as the manufacturer lists.
Lab Polishing Kit 3LR00.1A lab polishing kit in one stand: shaping tools, smoothing wheels, rubber polishers and felt wheels — from shaping to shine.
Zirconia & Ceramic Grinding and Polishing Kit 3Z00.1A lab grinding and polishing kit for zirconia and ceramic restorations, from shaping to shine, in one stand.
Zirconia Grinding and Polishing Kit 3Z00.3A compact grinding and polishing kit for zirconia restorations, in a stand where the tools are numbered by work step.
Zirconia Polishing & Grinding KitA six-step zirconia grinding and polishing kit, from soft pre-sintered zirconia to a mirror finish.
Ceramic Firing Paste (Peg Putty)A support paste for zirconia and ceramic restorations in the furnace — for sintering, crystallization, glazing and porcelain firing.
3D Scanning Developer PasteA lab scanning paste that creates an even matte surface on glossy or transparent materials, so the optical scanner can capture them accurately for CAD/CAM design.
Casting Investment RingAn investment ring system for the lost-wax technique: a ring, a base with sprue former and a top that shape the investment around the wax pattern for casting or ceramic pressing.
Soft Ceramic Firing PadA soft, round woven firing pad that veneers, crowns and ceramic restorations rest on during firing and sintering.
Disposable Alox Press PlungerA disposable alumina plunger for the press furnace: it pushes the softened ceramic ingot into the mold cavity of the investment ring.
Ceramic Glaze & Stain BrushesA series of professional brushes for the ceramic lab, for applying glaze and stains and for fine contouring. They are also used to finish crowns, veneers, inlays and onlays.
Press Plunger SeparatorA separating powder for ceramic pressing, applied to the plunger face to form a barrier between the plunger and the ingot in the press furnace.
Round Ceramic Sintering TrayA round high-purity alumina sintering crucible for sintering zirconia crowns and bridges in the sintering furnace.
Honeycomb Sintering Tray with Ceramic PinsA round honeycomb firing tray with ceramic pins, holding crowns, bridges and zirconia restorations during porcelain firing and sintering.
Examination kitA basic examination kit — mouth mirror, explorer and tweezers — the instruments that open every exam, routine treatment and restoration check.
Extracting Forceps — BlackExtraction forceps with a black finish, in beak patterns for teeth and roots in the upper and lower jaws.
Set of Tooth ForcepsA set of extraction forceps for routine extractions in both jaws — from the central incisors to the third molars, including root forceps.
Pediatric Extraction ForcepsPediatric extraction forceps for removing primary teeth and roots in the upper and lower jaws, smaller than adult forceps.
Root Elevator SetA set of root elevators for loosening a tooth or root from the periodontal ligament before extraction, and for lifting out roots and fragments.
LM-Arte Set, 5 pcsA set of five LM-Arte instruments for building anterior composite restorations in layers: placing, shaping and removing excess.
LM-Arte Set, 7 pcsA set of LM-Arte instruments for building composite restorations in layers: placing the material, shaping it, compacting it, setting layer thickness and removing excess.
Gracey Curette SetA set of double-ended Gracey curettes for subgingival scaling and root planing — the full series.
Composite Instrument KitA kit of double-ended instruments for direct composite build-up: placing, condensing, anatomic shaping and margin smoothing in anterior and posterior restorations.
Sinus Lift KitA hand-instrument kit for sinus-lift surgery, with double-ended membrane elevators that separate the sinus membrane from the sinus floor to make room for a bone graft in the posterior upper jaw.
Micro-surgery KitAn oral microsurgery kit: fine instruments for cutting, tissue elevation and suturing under loupes or a microscope, arranged in a sterilization tray.
Micro Mirror KitA set of four tiny mirrors, round and rectangular, for inspection while working under a microscope in root canal treatment and apical surgery.
Double-Ended Surgical RetractorA flat, double-ended surgical retractor for holding the cheek, lip, tongue and tissue flap away from the field in oral surgery.
Rubber Dam KitA rubber dam instrument kit for isolating the treatment field: a punch, clamp forceps, a metal frame and clamps in different shapes, in an organized tray.
Oral Surgery KitAn oral surgery kit in a zippered case: retractors, an anesthetic syringe, scissors, tissue forceps, a scalpel handle and double-ended instruments.
Castroviejo Needle HolderA fine Castroviejo-type needle holder for precise suturing in gum surgery, microsurgery and soft-tissue grafting.
Mathieu Needle HolderA Mathieu needle holder with a palm grip and a handle-end ratchet, for intraoral suturing in oral surgery, extractions and gum surgery.
Needle HolderA classic ring-handled needle holder with a ratchet lock, for suturing and knot tying in oral surgery, implant surgery and gum surgery.
Manual Crown and Bridge RemoverA manual slide-hammer crown and bridge remover, for releasing cemented crowns, bridges and provisional restorations.
Automatic Crown RemoverA spring-loaded automatic crown remover that releases cemented crowns and bridges with a short tap in the direction of removal.
Anesthesia SyringeA metal dental cartridge syringe with three rings, for local anesthesia by infiltration and nerve block.
Surgical ScissorsFine surgical scissors with short, curved, sharp blades for cutting sutures, trimming soft tissue and shaping membranes and grafts in the mouth.
Blade HandleA flat scalpel handle that takes interchangeable disposable blades, used for incisions in oral surgery, implant surgery and gum surgery.
Tofflemire Matrix RetainerA Tofflemire matrix retainer for Class II restorations in posterior teeth. It tightens a matrix band around the tooth to form a temporary wall where one is missing.
Dental CondenserA double-ended condenser for packing amalgam and restorative material into the prepared cavity, with round faces in two sizes — one at each end.
Osseodensification Burs KitAn osseodensification bur kit — preparing the implant site by compacting bone instead of removing it.
M3 Pro Gold V.3A set of nickel-titanium rotary files for shaping the root canal — from opening the canal entrance to finishing at the root end, including curved canals.
M3 Pro Gold – Taper SystemA set of gold-plated nickel-titanium rotary files for shaping the root canal from the upper part to the root end, in a fixed sequence of six files.
M3.RT (Retreatment)A set of three rotary files for root canal retreatment: they remove the old gutta-percha and filling materials from the canal in stages, before reshaping.
SuPliable BlueBlue nickel-titanium rotary files for shaping root canals, especially curved and complex ones.
M3-MAXA nickel-titanium rotary file for the final cleaning of the canal after shaping: it cleans the walls and the root-end area without changing the shape already created.
Stainless Steel K-FilesStainless-steel hand K-files: the basic tool in root canal treatment for finding and opening the canal, measuring working length and the first enlargement before nickel-titanium files.
Stainless Steel C-FilesStainless-steel hand files for creating an initial path in the canal and checking that it is open, before moving to nickel-titanium files. The manufacturer recommends them especially for calcified canals.
Irrigation NeedleA single-use needle for irrigating root canals, with a closed end and two side outlets, to deliver the irrigant inside the canal.
Silicone Endo File StoppersColored silicone stoppers for endodontic files, marking the working length on the file against the reference point on the tooth.
Micro-OpenerStainless-steel hand K-files on a long handle, for locating and opening canal orifices in posterior teeth when working under a microscope.
Micro-ShaperStainless-steel hand H-files (Hedström) on a long handle, for opening and enlarging canals in posterior teeth when working under a microscope.
PluggerA double-ended plugger for compacting gutta-percha during canal obturation: a slim nickel-titanium tip on one end and a larger stainless-steel tip on the other.
Hand File HolderA holder for hand files with an angled head that locks the file in place, making it comfortable to work on posterior teeth and in hard-to-reach areas.
Endo Measuring BlockA measuring block for endodontic files, used to set the file stopper quickly to the required working length.
Endo BoxAn organizer box for hand endodontic files, with a lid and an inner tray where each file sits in its own place by size — for storage, sorting and sterilization.
Endo Clean BoxA small cleaning stand for endodontic files: a cup with a sponge into which the file is dipped between insertions to clear debris.
Gutta-Percha PointsGutta-percha points for filling the root canal after it has been shaped — the material that seals the canal and keeps bacteria from returning.
Paper PointsAbsorbent paper points for drying the root canal after irrigation and before obturation.
No matching products found.
Images are for illustration only.
Contact us
A site visit, measurements and an initial plan with a price range — no obligation.
Leave a detailed message
Even outside business hours — we will get back to you.