Dual Cure Composite Luting Cement
INOX
A composite luting cement for final cementation of crowns, bridges, implant restorations, inlays, onlays, veneers and posts. It sets under light and chemically, so it cures even where light cannot reach. The syringe mixes the material at the tip, with no hand mixing and, according to the manufacturer, no air bubbles. This kind of cementation suits a restoration that is thick or opaque, where the curing light does not pass through. The shades, including transparent and white opaque, let the cement match the restoration.
Key features
- Dual cure — by light and chemically, even where light cannot reach
- Automix syringe — no hand mixing; no air bubbles, per the manufacturer
- 2-minute working time, set within 5 minutes
- Low film thickness — easy seating of crowns and bridges
- Radiopaque and fluoride-releasing, per the manufacturer
Technical specifications
- Type
- dual-cure composite luting cement in an automix syringe
- Composition
- glass ionomer in a Bis-GMA-based resin matrix
- Indications
- implant restorations · crowns · bridges · inlays · onlays · veneers · posts and pins · periodontal splints
- Working time
- 2 min
- Setting time
- 5 min
- Compressive strength
- 266 MPa
- Flexural strength
- 133 MPa
- Shades
- A1 · A2 · A3 · A4 · transparent · blue · white opaque
- Packaging
- 10 g automix syringe; kits of 1, 2 or 4 syringes with mixing and intraoral tips
Data as published by the manufacturer. Details vary by configuration — talk to us.
More in this category
New
Nanoksa G-Plus High-Performance Polymer DiscA high-performance polymer disc for milling on a CAD/CAM machine, for permanent restorations on implants — bridges, full-arch work and crowns.
Nanoksa G-Plus Resin for Permanent RestorationsA 3D printing resin for permanent restorations: veneers, inlays, onlays and single crowns. It is the printable form of Nanoksa G-Plus, which also comes as a milling disc.
PEKK-ALLIED Resin for Prosthetic FrameworksA 3D printing resin for prosthetic frameworks: denture bases, partial denture frameworks and implant-supported structures such as All-on-4 and All-on-6. According to the manufacturer it belongs to the PEKK family of polymers.
Nanoksa Direct Clear Aligners ResinA resin for directly printing clear aligners on a 3D printer — with no printed models and no heat-formed plastic sheets.
Nanoksa G-Plus High-Performance Polymer DiscA high-performance polymer disc for milling on a CAD/CAM machine, for permanent restorations on implants — bridges, full-arch work and crowns.
Nanoksa G-Plus Resin for Permanent RestorationsA 3D printing resin for permanent restorations: veneers, inlays, onlays and single crowns. It is the printable form of Nanoksa G-Plus, which also comes as a milling disc.
PEKK-ALLIED Resin for Prosthetic FrameworksA 3D printing resin for prosthetic frameworks: denture bases, partial denture frameworks and implant-supported structures such as All-on-4 and All-on-6. According to the manufacturer it belongs to the PEKK family of polymers.
Nanoksa Direct Clear Aligners ResinA resin for directly printing clear aligners on a 3D printer — with no printed models and no heat-formed plastic sheets.
Contact us
A site visit, measurements and an initial plan with a price range — no obligation.
Leave a detailed message
Even outside business hours — we will get back to you.