Nanoksa Direct Clear Aligners Resin
INOX
A resin for directly printing clear aligners on a 3D printer — with no printed models and no heat-formed plastic sheets. Each stage of the treatment plan is printed straight as an aligner, which removes the model, the sheet and the forming step. The resin comes in three stiffness grades — soft, medium and hard — and needs washing and post-curing according to the manufacturer’s instructions.
Key features
- Direct printing of the aligner — no model, no PETG sheet
- Mechanical properties similar to PETG, per the manufacturer
- Three stiffness grades: soft, medium and hard
- Residual monomer below 0.1%, per the manufacturer
- For crowding, spacing and bite problems
Technical specifications
- Type
- resin for direct printing of clear aligners
- Mechanical properties
- similar to PETG, per the manufacturer
- Young’s modulus
- 500–1000 MPa
- Hardness
- Shore D60–70
- Residual monomer
- below 0.1%
- Stiffness grades
- soft · medium · hard
- Indications
- crowding · spacing · overbite · underbite · crossbite · open bite
Data as published by the manufacturer. Details vary by configuration — talk to us.
More in this category
New
Nanoksa G-Plus High-Performance Polymer DiscA high-performance polymer disc for milling on a CAD/CAM machine, for permanent restorations on implants — bridges, full-arch work and crowns.
Nanoksa G-Plus Resin for Permanent RestorationsA 3D printing resin for permanent restorations: veneers, inlays, onlays and single crowns. It is the printable form of Nanoksa G-Plus, which also comes as a milling disc.
PEKK-ALLIED Resin for Prosthetic FrameworksA 3D printing resin for prosthetic frameworks: denture bases, partial denture frameworks and implant-supported structures such as All-on-4 and All-on-6. According to the manufacturer it belongs to the PEKK family of polymers.
Nanoksa Flexible Denture ResinA 3D printing resin for flexible partial dentures — removable prostheses that replace several missing teeth and flex with the movements of the mouth.
Nanoksa G-Plus High-Performance Polymer DiscA high-performance polymer disc for milling on a CAD/CAM machine, for permanent restorations on implants — bridges, full-arch work and crowns.
Nanoksa G-Plus Resin for Permanent RestorationsA 3D printing resin for permanent restorations: veneers, inlays, onlays and single crowns. It is the printable form of Nanoksa G-Plus, which also comes as a milling disc.
PEKK-ALLIED Resin for Prosthetic FrameworksA 3D printing resin for prosthetic frameworks: denture bases, partial denture frameworks and implant-supported structures such as All-on-4 and All-on-6. According to the manufacturer it belongs to the PEKK family of polymers.
Nanoksa Flexible Denture ResinA 3D printing resin for flexible partial dentures — removable prostheses that replace several missing teeth and flex with the movements of the mouth.
Contact us
A site visit, measurements and an initial plan with a price range — no obligation.
Leave a detailed message
Even outside business hours — we will get back to you.