The full catalog.

S500The Bondent S500 dental unit, built for daily work and for precise procedures. The chair starts at 450 mm and has a folding leg cushion, so getting in and out stays easy for older patients, children and anyone with limited mobility. Controls are centralised and include position memory for repeated work, and a multi-layer disinfection system reduces cross-infection. The unit carries CE marking and ISO 13485. JK Dent installs, trains and maintains.BondentDental units ST-D307A complete dental unit from the ST-D series, with configuration and upholstery chosen for the room and the clinician’s preference. Chair, light, delivery arm and assistant unit arrive as one assembly with a three-way syringe and suction system — an operatory ready to work the day it is installed, rather than a list of components that still have to be matched to each other. JK Dent measures the room, installs, connects to the infrastructure and services it.SuntemDental units E200BA complete dental unit from the E200 series: chair, light, delivery arm and assistant tray in one configuration. It is meant for a practice that wants a finished operatory rather than parts assembled from three suppliers — because when everything comes from one source, so does the service, and that is what decides how long the position stands idle the day something jams. The upholstery is continuous so cleaning passes in one wipe with no seams to trap. JK Dent measures the room, installs, connects to the infrastructure and services it.BondentDental units ST-D303A complete dental unit: chair, operating light, lower instrument tray, assistant unit and three-way syringe. The down-mounted configuration — where the delivery arm comes from below rather than over the patient’s chest — is more open for a clinician working four-handed with an assistant, and leaves the space above the patient clear. The chair moves on a 24 V motor and the seat is continuous for cleaning. JK Dent measures the room, installs, connects power, water and suction, and services it.SuntemDental units E200CA complete dental unit from Bondent’s E200 series: chair, light, delivery system and assistant tray in one configuration. It suits a clinic that wants a ready workstation rather than assembling parts from different sources — services, water and suction meet at a single point planned in advance. Supplied, installed, trained and maintained by JK Dent.BondentDental units NewFinScan F350The FinScan F350 is a cone-beam CT unit (CBCT) — not a lab scanner. It images at three fields of view, from a narrow one centered on a single tooth to a wide one covering both arches, producing a 3D volume for implant planning, endodontic diagnosis and bone assessment. The model carries all three approvals: NMPA, FDA and CE. JK Dent handles installation, staff training and ongoing service.EighteethImaging CBCT-1030 ProA dual-function unit: panoramic and 3D imaging from the same machine in the same footprint. That removes both the choice between two machines and the floor space it would demand. The panoramic covers general survey; the 3D volume serves implant planning, endodontic diagnosis and pre-surgical bone assessment — three uses where a two-dimensional film simply is not enough. Installation requires a shielded room and is subject to local radiation licensing. Installed by JK Dent, with training and ongoing service.BondentImaging HyperLight MThe M version of the HyperLight portable X-ray unit — we choose between versions by imaging volume and by use: carried between rooms or kept at one station. A portable X-ray unit from Eighteeth’s HyperLight line. The manufacturer states a 0.4 mm focal spot, a weight of 1.8 kg for one-hand operation, a built-in double lead shield, a backscatter shield and a lock that prevents unintended exposure. This is the M version of the line. We match the version to imaging volume and to how it will be used — carried between rooms or kept at one station.EighteethImaging HyperLight-AThe Eighteeth HyperLight-A is a new-generation dental X-ray unit designed to support efficient and convenient intraoral radiography in everyday dental practice. Its compact, modern design and streamlined operation help simplify the imaging workflow while providing the clinician with greater flexibility during X-ray acquisition. The HyperLight-A is an ultra-lightweight portable dental X-ray unit engineered for effortless one-handed operation and high-quality intraoral imaging. Weighing only 1.0 kg, its compact patented design helps reduce operator fatigue while fitting easily into any clinical environment. Featuring an industry-leading 0.3 mm focal spot, HyperLight-A is designed to deliver sharper image details for more accurate diagnosis. Three selectable exposure modes — 70 kV/2.0 mA, 65 kV/2.5 mA, and 60 kV/2.0 mA — provide flexibility for different clinical imaging requirements. Key Features: 1.0 kg ultra-light design • 0.3 mm focal spot • Three selectable exposure modes • Patented circuit architecture for optimized energy conversion • Solid potting insulation technology for stable performance and elimination of oil-leakage risk • Aerospace-grade rare-earth oxide radiation shielding • Patented dynamic battery management technology • 1350 mAh battery.EighteethImaging HyperLightHyperLight is a handheld chairside X-ray: you hold it and take a periapical image in any room, with no dedicated X-ray room and no fixed wiring. It runs on a rechargeable battery, weighs 1.8 kg, and comes with double lead shielding. Supplied, taught and serviced by JK Dent — installation and use remain subject to local radiation licensing.EighteethImaging HyperLight GThe G version of the HyperLight portable X-ray unit. A portable X-ray unit from Eighteeth’s HyperLight line. The manufacturer states a 0.4 mm focal spot, a weight of 1.8 kg for one-hand operation, a built-in double lead shield, a backscatter shield and a lock that prevents unintended exposure. This is the G version of the line. Use of X-ray equipment is subject to licensing and to the radiation-safety rules that apply to the practice.EighteethImaging Sensor Holder System-OneFitSensor Holder System-Eighteeth OneFitEighteethImaging NanoPix-MAn intraoral sensor from the NanoPix-M series in size 1.5 — the middle size that covers most radiographs in an adult practice without being oversized for the premolar region. Same series technology: CsI scintillator, APS CMOS sensor, 16-bit conversion and IP68 sealing at 4.5 mm thick. Direct USB connection, no control box. Supplied, connected and serviced by JK Dent.EighteethImaging NanoPixThe standard-size NanoPix sensor — the model that covers most day-to-day radiographs and connects straight to the practice computer and the existing X-ray generator. An intraoral sensor from Eighteeth’s NanoPix line, for digital radiography in place of film. The manufacturer states a 4.4 mm body, an image in 3 seconds, resolution up to 25 lp/mm, automatic exposure detection (AED) and an APS CMOS sensor with a CsI layer. The cable is tested to more than 70,000 bends and the sensor is rated for more than 50,000 exposures. It connects to the practice computer and works with common X-ray generators. Installed and supported by JK Dent.EighteethImaging NanoPix E1.3The E1.3 version of the NanoPix line — we match size and version to how the practice works and to who is being imaged: adults, children, or focused endodontic work. An intraoral sensor from Eighteeth’s NanoPix line, for digital radiography in place of film. The manufacturer states a 4.4 mm body, an image in 3 seconds, resolution up to 25 lp/mm, automatic exposure detection (AED) and an APS CMOS sensor with a CsI layer. The cable is tested to more than 70,000 bends and the sensor is rated for more than 50,000 exposures. The E1.3 is one version in the line; we match size and version to how the practice works.EighteethImaging F220 Phosphor Plate ScannerA phosphor plate scanner — the digital route that stays closest to film. The plate is thin and flexible and bends inside the mouth, so it is comfortable where a rigid sensor presses, and it fits mouths where a sensor simply will not seat. After exposure the plate goes into the scanner and the image reaches the computer in seconds. Plates come in several sizes and are reused many times. Supplied, connected and serviced by JK Dent.FussenImaging Lead ApronA lead apron is a protective garment worn to shield the body from ionizing radiation during dental or medical X-ray procedures. It is lined with lead (or lead-equivalent materials) that effectively block and absorb X-ray beams. Its primary purpose is to protect sensitive vital organs and tissues from unnecessary radiation exposure, ensuring the safety of both patients and dental professionals.Imaging Helios 700 Intraoral ScannerA wireless intraoral scanner. The cable is what constrains a scanner inside the mouth — it pulls on the hand and dictates the angle — and here there is none: the battery holds 100 minutes of continuous scanning, more than a reasonable working day asks for. A full-arch scan takes under 30 seconds at 16 μm accuracy, a single tooth at 8 μm. Under 225 g, and files export in STL, PLY and OBJ wirelessly to the lab. Supply, calibration and maintenance — JK Dent’s responsibility.EighteethImaging Helios 500An intraoral scanner from Eighteeth: it replaces the impression tray with a digital scan sent straight to the lab or to the milling machine in the clinic. Scanning shortens the restoration path — no impression to ship, no waiting for a plaster model, and the scan can be checked on screen before the patient leaves the chair. Supplied, installed, trained and maintained by JK Dent.EighteethImaging HeyInScan S5LoddenImaging Orion KitEighteethImaging G4 Pro (DOM4000E)A dental surgical microscope, for work where the unaided eye no longer suffices: locating a fourth canal, examining a crack, preparing margins, assessing healing. The arm is balanced so the head stays exactly where you set it when you let go — a precondition for sustained work under magnification. Coaxial illumination travels parallel to the line of sight, so the cavity opening does not shadow its own depth. A camera can be attached to document the case. Installed, calibrated and serviced by JK Dent.BondentMicroscopes & loupes DOM 3000D-4k PROA dental microscope from Bondent’s DOM line with a 4K video system. Magnification serves endodontics, periodontics and precise restorative work, and the screen also helps explain the case to the patient and document it. We match the configuration — arm, lighting and recording system — to the treatment room.BondentMicroscopes & loupes MCS 3000AA treatment microscope for everyday clinic use, not just complex cases. Magnification changes what counts as possible in restorative work: a margin that looks smooth to the eye reads as ragged under magnification, and a crack that was hidden becomes plain. The arm moves easily and holds where it is left, and the light reaches the depth of the cavity. Installed by JK Dent, with staff training and ongoing service.FantaMicroscopes & loupes OMS2380A treatment microscope with TrueTone LED illumination, which carries true tissue color — a difference that matters when judging gingival inflammation or matching a restoration shade. Lamp life exceeds 20,000 hours, so replacing a bulb is not part of clinic routine. The binocular head inclines on adjustment, and the unit comes in four mounting options: mobile base, wall, ceiling or fixed floor — so it fits a room that is already built. Installed and serviced by JK Dent.ZumaxMicroscopes & loupes OMS2350A treatment microscope with six magnification steps — 0.33 to 3 — selected on a single dial without interrupting the procedure. A working distance of 190 to 300 mm covers both close work on a single tooth and a wide view of the arch, and 60,000 lux of LED reaches the canal depth where an ordinary unit light stops helping. The binocular head inclines through 0 to 180 degrees with interpupillary adjustment, so the clinician fits the instrument to their posture rather than the reverse. Fine focus over 12 mm, 250 mm final objective. Installed, calibrated and serviced by JK Dent.ZumaxMicroscopes & loupes Eighteeth Acuvision XEighteethMicroscopes & loupes Brilliance 3xLoupes at 3.0× in a flip-up frame, so the optics lift away without taking the glasses off your face. This magnification is the right entry point for most restorative work: enough to see a bur tip and a margin line, while keeping a field wide enough that you are not repositioning after every movement. The glass is Schott and the multi-layer coating holds off fogging, scratching and glare. Working distance is chosen from the clinician’s own height and posture. Fitted personally by JK Dent, with ongoing service.EighteethMicroscopes & loupes Brilliance 3.5xLoupes at 3.5× in a flip-up frame. Half a step above 3.0× sounds like little, but in practice it is the difference between seeing a crack and inferring one — at the cost of a slightly narrower field and more disciplined head movement. Suited to endodontics, subgingival margins and fine restorative work. Schott glass, an achromatic path and multi-layer anti-fog, anti-scratch coating. Working distance is set to the individual. Fitted by JK Dent, with ongoing service.EighteethMicroscopes & loupes Brilliance 48 ProPrismatic loupes at 5.0× whose optical path is deflected 48 degrees downward. That deflection is the whole point: it brings the image up to the eye while the head stays upright, instead of the neck bending down to meet the image. At high magnification this stops being comfort and becomes a condition — without it an hour of precise work ends in neck pain. Schott glass, adjustable interpupillary distance, aluminum-magnesium alloy frame. Fitted personally by JK Dent, with ongoing service.EighteethMicroscopes & loupes Softouch Loupe Light SourceA light source that clamps to the loupes and lights exactly where the eye is looking. Ceiling light in an operatory is blocked by the clinician’s own head and shoulder the moment they lean in — which is why the cavity you are actually working in is usually the least-lit spot in the room. A light on the frame solves that because it travels with the line of sight. Brightness is set on a small control unit clipped to the tunic. Comes through JK Dent, with service and maintenance.EighteethMicroscopes & loupes Wireless Z HeadlightA cordless LED headlight for loupes that removes the cable running from the frame to a belt pack. That cable is not a small detail — it snags on the chair, drags the loupes off the nose and limits movement around the patient. Here the battery sits in the light body itself and total weight is 29.5 g, so nothing extra registers on the face. Output reaches 35,000 lux with stepless dimming and brightness memory, and one charge covers two and a half continuous hours. A universal clamp fits any loupe. JK Dent supplies it and keeps it working.EighteethMicroscopes & loupes Suction motoe 750wA suction motor for the practice. Suction is what clears fluids and aerosol from the mouth and keeps the field clean; the motor is chosen by the number of chairs it serves and the length of the pipework. We match model and capacity to the practice layout.AntarAir & suction AEOLUS-370X Portable SuctionA mobile suction unit on castors, for a room with no central suction infrastructure. It answers three real situations: a second operatory opened after the clinic was already built, a leased practice where you cannot cut into the slab, and a backup for the day the central pump is being serviced. Hoses and filter are reachable for daily cleaning without tools. Supplied by JK Dent with training and ongoing service.AntarAir & suction NewIMPVAV## IMPNAV – AI Intelligent Dynamic Navigation System **What is IMPNAV?** IMPNAV is an **AI-powered dynamic navigation system for dental implant surgery**, designed to connect digital preoperative planning with real-time surgical navigation. It enables the clinician to visualize and monitor the position and movement of the surgical instrument in relation to the planned implant trajectory during the procedure. **How it works** The workflow begins with **preoperative planning based on the patient’s CT data**. During surgery, an **optical navigation system** tracks the instrument in real time and provides **3D dynamic guidance**, allowing the clinician to continuously monitor the drilling position, direction and depth according to the planned implant position. **Key Features & Technology** * **3D Real-Time Dynamic Navigation** throughout implant surgery. * **Optical Tracking Technology** for real-time instrument positioning. * Manufacturer-specified **0.1 mm positioning accuracy** and **0.1 mm micro-motion recognition**. * **AI Automated Segmentation** of anatomical structures. * Automatic generation of **3D STL models**. * Segmentation of teeth, soft tissue, maxilla, mandible, maxillary sinus, inferior alveolar canal, incisive canal, cranial base and airways. * STL models can support **digital treatment planning, 3D printing, clinical case presentation and patient communication**. **Key Advantages** Unlike a static surgical guide, dynamic navigation provides **real-time visual guidance while preserving clinical flexibility**, allowing the clinician to monitor and adapt the surgical trajectory during the procedure. It combines digital planning, optical tracking and AI-assisted 3D visualization in a single digital workflow. **IMPNAV – From 3D Planning to Real-Time Surgical Navigation.** impnavSurgery & implants Aurora-SA combined laser system: Er:YAG at 2940 nm together with a diode laser at 980, 650 and 450 nm. That combination is the reason to buy a unit like this — Er:YAG is absorbed by water and works on hard tissue and bone without heat building up, while the diode handles soft tissue. One unit therefore covers cavity preparation, bone surgery and soft-tissue cutting. Two laser modes, and the unit rolls between rooms on castors. Class IV — protective eyewear and a room safety protocol are required. Supplied by JK Dent with training and ongoing service.SogaSurgery & implants iLaser I PlusA desktop diode laser with three wavelengths — 450, 650 and 980 nm — in one instrument. The three are not alternatives but complements: each is absorbed by different tissue, so a single unit covers a wider range of indications than a single-wavelength device. Class IV — protective eyewear is required for staff and patient, along with a room safety protocol. Through JK Dent — with warranty and in-clinic service.SogaSurgery & implants iLaser IA diode laser from Soga for soft-tissue use in the dental clinic: cutting, coagulation and periodontal treatment, with a thin optical fiber that reaches areas mechanical instruments struggle with. It suits anyone who folds soft-tissue treatment into routine work and wants precise power control per indication. Supplied, installed, trained and maintained by JK Dent.SogaSurgery & implants iLaser IIA pen-body diode laser weighing 106 g with an internal battery — no benchtop unit and no mains cable. Its 980 nm wavelength is well absorbed by water and hemoglobin, so it cuts soft tissue and coagulates in the same pass; the cut comes out clean without bleeding that obscures the field. Continuous power reaches 3 W with a 5 W pulse peak, adjustable from 0.5 W upward, with 200 and 400 μm fibers and a red aiming beam. Class IV — protective eyewear is required for staff and patient. Supplied by JK Dent with training and ongoing service.SogaSurgery & implants MotorSurgA surgical implant motor with a torque range of 5 to 80 N·cm and speeds from 200 to 40,000 rpm — meaning one unit handles both fast drilling and slow high-torque seating without swapping instruments mid-surgery. Torque feedback is shown in real time, which is what lets you feel bone resistance before it becomes a problem. The water pump delivers up to 130 mL/min, eight programs are stored, and calibration takes one button. The 20:1 contra-angle is lit at adjustable brightness. Supply, calibration and maintenance — JK Dent’s responsibility.EighteethSurgery & implants B1A piezo ultrasonic unit with five working modes: bone, endo, perio, custom and clean. Piezo cuts mineralized bone while leaving soft tissue — nerve, membrane, vessels — largely untouched, which is why it is the preferred instrument for sinus lift, bone harvesting and implant exposure. Separate control of power and coolant lets you bring heat down without giving up cutting force. An end-of-day cleaning cycle flushes the fluid lines. Supplied by JK Dent, with training on its use and follow-up service.SogaSurgery & implants E-FlowE-Flow is a computer-controlled local-anesthesia system with a touchscreen and foot pedal. It monitors tissue pressure in real time and shows it on screen, so the clinician sees at once whether the needle is in dense bone or soft tissue, and the unit adjusts flow rate accordingly. It includes aspiration to check for a vessel before delivery, and separate working modes including PDL. Installed, taught and serviced by JK Dent.EighteethMore devices Smart IThe SOGA Smart I is a pen-style electronic local-anesthesia injector. Instead of hand pressure it delivers at a controlled, even rate — which blunts the pain that comes from injecting too fast — and covers infiltration, block and periodontal-ligament (PDL) anesthesia in one instrument. It recharges and accepts any needle you prefer. Supplied, demonstrated and serviced by JK Dent.SogaMore devices Smart IIThe SOGA-Smart II is the second generation of SOGA’s electronic injector, built on the CCLAD principle: a computer-held constant flow with a gradual ramp-up at the start of the injection. Three speed modes — fast, slow and PDL — cover most indications, it weighs just 65 g, and it recharges rather than taking disposable batteries. Supply, a chairside demonstration and maintenance — from JK Dent.SogaMore devices NanoMotorEighteethEndo & perio E-value EEighteethEndo & perio E-XtremeEighteethEndo & perio E-CONNECT SEEighteethEndo & perio E-connect SEighteethEndo & perio FindPexEighteethEndo & perio E-PEXEighteethEndo & perio Ultra XEighteethEndo & perio SurfyOneEighteethEndo & perio Ultra Mint ProOne ultrasonic unit for three jobs: scaling, periodontal therapy and root treatment. It runs across a wide frequency range, accepts both EMS-type and Satelec-type tips — so there is no need to switch tip supplier — and feeds irrigant from an internal reservoir or an external source. The internal reservoir is built to run sodium hypochlorite, chlorhexidine, hydrogen peroxide or saline directly. The handpiece detaches, autoclaves, and lights the field while you work. Installed and serviced by JK Dent.EighteethEndo & perio Space-Pack & Space-FillEighteethEndo & perio Fast-Pack proEighteethEndo & perio Fast-FillEighteethEndo & perio OPUS cart acteonThe ACTEON OPUS combines two prophylaxis instruments in one body: an ultrasonic scaler from the Newtron family, and an air polisher with the SILKY pen. In ultrasonic mode it lifts calculus and plaque while sparing tooth and gingiva; in polishing mode it delivers a controlled mix of air, water and fine powder that clears stain and biofilm above and below the gum line. More than 60 ultrasonic tips and four dedicated SILKY nozzles are available, and CloggingControl limits clogging. ACTEON is a French manufacturer. Installed and supported by JK Dent.ActeonEndo & perio Air PolisherAn air-polishing unit for clearing plaque and stain from tooth surfaces. A mix of air, water and fine powder reaches places an ultrasonic tip cannot enter — fissures, pits and around orthodontic brackets — without scratching enamel. The powder chamber is clear so you can see the level while working, and the handpiece is light and balanced. Installed and serviced by JK Dent.SogaEndo & perio MotorTurboA brushless electric micromotor with a compact control unit, for everyday restorative work. It holds torque as resistance rises — unlike an air turbine, which weakens the moment it meets hard material — so the cut stays even and does not burnish. Range 2,000 to 40,000 rpm with torque to 3.0 N·cm, and gear ratios of 1:5, 1:1, 16:1 and 20:1 from the same unit. Four memories, a white LED in the head, and a color display. At 130 × 129 × 54 mm the control unit fits any delivery position. Installed and serviced by JK Dent.EighteethMore devices Imix-M3The Imix-M3 is a benchtop capsule mixer. It shakes an amalgam capsule, a glass-ionomer cement or any other encapsulated material at a fixed frequency for a set time, so the mix comes out uniform every time rather than depending on hand technique. Time is set in seconds on a digital display, programs are stored in memory, and the clear lid locks the chamber while it runs. JK Dent supplies it, and repairs it when it needs repairing.FomosMore devices LED Whitening Light (mobile stand)LED whitening light on a mobile stand for in-clinic teeth whitening. Easily moved between treatment rooms, installed and supported by JK Dent.More devices CuringPen-XA curing light at 3000 mW/cm², with three blue LEDs and one violet spanning 380 to 515 nm. That broad range matters because the photoinitiators in modern composites are not all absorbed at the same wavelength — a blue-only light leaves some materials incompletely cured, and the result only shows up when the restoration fractures. Eight pre-programd curing modes, an 8 mm head that rotates 360 degrees, 65 g, and an output self-check on the charging base so you know the light still delivers what it claims. Supplied by JK Dent, with training on its use and follow-up service.EighteethMore devices CuringPenA pen-body curing light, light and balanced for everyday use. The slim form reaches posterior angles where a wide head cannot sit parallel to the restoration — and the wrong angle means a partial cure however powerful the light. It charges on a bench base and is ready for every appointment. Supplied and serviced by JK Dent.EighteethMore devices CuringPen-EEighteethMore devices E-Sanit 23A 23-liter Class B autoclave — the standard required to sterilize hollow, wrapped and textile loads, not just bare instruments. Three pre-vacuum pulses draw air out of a narrow lumen before steam enters; without that, an air pocket inside a tube blocks sterilization and the instrument leaves the cycle unsterile even though the cycle reported success. A 254 × 455 mm chamber and a 4.5 L reservoir allow several cycles back to back without refilling, and the touchscreen shows cycle progress. Real-time water quality monitoring, EN ISO 11607 compliant. Installation, staff training and ongoing service — from JK Dent.EighteethSterilization & hygiene Tanda Pro 18LAn 18-liter Class B autoclave with a twin vacuum pump reaching −0.92 bar. Three pre-vacuum pulses clear air from the lumen before steam, and residual humidity at the end of the cycle stays below 0.2% — meaning instruments come out dry and can be pouched immediately rather than left to stand. The unit runs Vacuum, B&D and Helix tests, which are how you confirm a cycle actually worked rather than merely finished. Fast cycle for loads up to half a kilogram, a five-tray rack, 220 to 230 V. Installed by JK Dent, with training and ongoing service.WosonSterilization & hygiene Sealing MachineA continuous sealer for sterilization pouches. It seals reel stock to whatever length you choose, so each instrument is packed to its own size rather than into a standard pouch with dead air — less volume in the autoclave chamber and a pack that opens cleanly. A continuous, even seam is what keeps sterility until the moment of opening; a partial seam voids the whole cycle. The reel mounts on a top spindle and cutting happens in the same motion. JK Dent supplies it and keeps its consumables in stock.Sterilization & hygiene Water DistillerA water distiller producing distilled water for the autoclave and clinic equipment. Supplied with guidance and support from JK Dent.Sterilization & hygiene Handpiece Oiling MachineAn automatic oiling machine for dental handpieces and turbines. Extends equipment life, backed by JK Dent service and support.Sterilization & hygiene HeyMill W19Five-axis wet milling machine for hard materials: grade-5 titanium, cobalt-chrome, glass-ceramics and polymers. Two spindle modes — quick and high-power — move it between fine finishing and metal cutting on the same machine. It takes round disks, blocks and pre-milled titanium columns, and is aimed at angled multi-unit abutments and precision screw-retained work. JK Dent installs it in the lab, trains the team and services it.LoddenLaboratory HeyMill D18Five-axis dry milling machine with no compressor — the lab needs no compressed-air infrastructure. A 60,000 rpm spindle, an automatic ten-bur changer and milling accuracy down to one micron. It monitors bur life, alarms on breakage, and resumes from the breakpoint after an interruption, so a whole disc is not lost mid-job. JK Dent installs it in the lab, trains the team and services it.LoddenLaboratory W16Five-axis hybrid milling machine — wet and dry in one unit, so a single lab covers zirconia, wax, resin, glass-ceramics, titanium, pre-milled blanks and soft metals without splitting the work between two machines. High-power water-cooled spindle, tool-life monitoring and job recovery after a power cut. Compatible with mainstream CAM systems. Supplied, installed, staff-trained and maintained by JK Dent.LoddenLaboratory HeyTemp TSTS-series zirconia sintering furnace with high-purity Elema heating elements. It pre-dries the restoration and clears residual moisture before the sintering cycle, so no preheating is needed and work can go straight in. Fast and slow sintering are combined; in fast mode — with silicon-carbide heating rods — sintering time drops to about an hour. Up to 150 units per cycle, with no metal-ion contamination. Supplied, installed, staff-trained and maintained by JK Dent.LoddenLaboratory HeyTemp T5MCompact porcelain furnace covering most lab finishing work: glass-ceramic crystallization, glazing, porcelain firing, filling, staining and ring burnout. Its small footprint lets it sit on a bench without clearing dedicated space. Installation, staff training and ongoing service — from JK Dent.LoddenLaboratory HeyTemp T6IPress furnace for glass-ceramic restorations — it complements the porcelain furnace for work that is pressed rather than milled. Full technical detail by configuration from the manufacturer. Installation, staff training and ongoing service — from JK Dent.LoddenLaboratory D-Series 3D PrinterA family of 3D printers for lab and clinic: D158 and D160 use DLP at 2560×1440 with 62 μm XY accuracy, while the DJ89 Plus uses LCD at 8K with 29 μm for fine work. 405 nm light source, layer thickness from 1 μm, and 1–4 seconds per layer. The software carries a dental algorithm with automatic nesting on the platform, and supports model resin, castable wax, rigid, high-toughness and biocompatible resins. Supplied, installed, staff-trained and maintained by JK Dent.LoddenLaboratory CD-X3Ultrasonic cleaning machine for printed parts: it removes uncrosslinked resin and print supports before curing. One-button dual-acoustic-wave cleaning with deoxygenation — the step that decides surface quality before finishing. Supplied and installed by JK Dent, which stocks its spare parts.LoddenLaboratory UV02Post-curing chamber for 3D-printed parts. Three wavelengths — 365, 385 and 405 nm — work independently, so different resins can be cured each at its own wavelength and curing completes rather than staying partial. It is the direct counterpart to the ultrasonic cleaner in the printing chain. Supplied and installed by JK Dent, which stocks its spare parts.LoddenLaboratory INOX Chairside 3D PrinterA resin 3D printer sized to stand in the clinic, not only in a lab. It closes a loop: intraoral scan, design, print — a splint, a model, a surgical guide or a temporary restoration — the same day, with nothing sent out. The touchscreen runs the job from the machine itself, and the hood filters light so the resin does not cure before its time. Installed by JK Dent, with staff training and ongoing service.INOXLaboratory INOX N1 LED & Nitrogen Curing MachineA post-curing unit for printed parts, with LED light and nitrogen flow. A part that leaves the printer is not finished: its outer layer stays soft and tacky because atmospheric oxygen halts polymerization at the surface. Nitrogen displaces that oxygen from the chamber, so the cure reaches the surface too — the result is stronger, more color-stable and, above all, not tacky. Chamber lit from both sides, with stored time programs. Installed by JK Dent, with training and ongoing service.INOXLaboratory NewNanoksa G-Plus BlocksMilling discs of high-performance polymer filled with nano-zirconia and carbon, for permanent restorations. That composition gives a material that mills cleaner and faster than full zirconia and needs no firing — fewer steps between milling and delivery. The disc is made for standard CAD/CAM systems. JK Dent keeps the lab in steady supply.INOXINOX Materials Nanoksa G-Plus ResinNanoksa G-Plus resin for 3D printing. It belongs to the INOX family of materials for digital laboratory work; washing and post-curing follow the manufacturer’s instructions before finishing. Indications and printer compatibility are per the manufacturer’s data sheet.INOXINOX Materials PEKK-ALLIEDPEKK-ALLIED is a high-performance polymer for substructures and frameworks — the PEKK family serves as a non-metal alternative in implant work and in restorations where metal is to be avoided. Indications and processing are per the manufacturer’s data sheet.INOXINOX Materials Nanoksa Clear Aligners ResinNanoksa resin for printing clear aligners. Each step of the movement plan prints separately and the clarity holds across the series. Washing and post-curing follow the manufacturer’s instructions before the aligners go to the patient.INOXINOX Materials Nanoksa Flexible ResinFlexible Nanoksa resin for 3D printing. The flexibility is meant for work that has to pass undercuts or be worn comfortably over time. Washing and post-curing follow the manufacturer’s instructions.INOXINOX Materials Nanoksa Gingiva KitA kit gathering the gingival shades needed for implant work and long bridges, where the gingival line is part of the restoration rather than a backdrop to it. Nanoksa Gingiva is a light-cured gingival composite for rebuilding the shade of the pink tissue. Per the manufacturer it is built in a basic layer or in multiple layers and is compatible with the Nanoksa LAB system. The kit gathers the gingival shades needed for implant work and long bridges, where the gingival line is part of the restoration rather than a backdrop to it.INOXINOX Materials Nanoksa Lab compositeNanoksa LAB is a light-cured laboratory composite system for indirect restorations: crowns and bridges, inlays, onlays and veneers. The manufacturer describes a nano-particle and zirconium filler in a urethane dimethacrylate matrix, a combination aimed at strength, wear resistance and high polishability. Build-up is done in layers outside the mouth and cured in a laboratory light unit.INOXINOX Materials Nanoksa StainsNanoksa Stain is a characterisation kit for composite restorations. The manufacturer states eight characterisation shades in syringes with an ultra-fine tip, for direct and indirect restorations and for masking discoloured tooth structure.INOXINOX Materials Dual Cure Composite Luting CementA dual-cure composite luting cement: it sets under light and also chemically, which suits cementing crowns, bridges and posts where light cannot reach the whole cement layer. Working time and excess removal follow the manufacturer’s instructions.INOXINOX Materials BondsBonding materials from INOX for use with the manufacturer’s composite systems. The bond creates the link between tooth tissue and restoration, and the technique — total-etch, self-etch or universal — follows the product’s instructions for use.INOXINOX Materials Nanoksa Gingiva body syringeThe Body syringe carries the base tissue shade — the layer over which modifier and opaque are added to complete the look. Nanoksa Gingiva is a light-cured gingival composite for rebuilding the shade of the pink tissue. Per the manufacturer it is built in a basic layer or in multiple layers and is compatible with the Nanoksa LAB system. The Body syringe carries the base tissue shade — the layer over which modifier and opaque are added to complete the look.INOXINOX Materials Nanoksa Gingiva Modifier SyringeThe modifier syringe shifts the base shade: lighter, darker, or towards red or brown, to match the patient’s own gingiva. Nanoksa Gingiva is a light-cured gingival composite for rebuilding the shade of the pink tissue. Per the manufacturer it is built in a basic layer or in multiple layers and is compatible with the Nanoksa LAB system. The modifier syringe shifts the base shade: lighter, darker, or towards red or brown, to match the patient’s own gingiva.INOXINOX Materials Gingiva Opaque ModifierA modifier for the gingival opaque. It tunes the shade of the blocking layer itself so the layers above stay natural instead of reading flat.INOXINOX Materials Gingiva OpaqueA gingival opaque for blocking a dark substrate before the pink tissue is built. A thin layer stops metal or framework from showing through the gingival layers and greying the shade.INOXINOX Materials Broken Instrument Removal KitA kit for removing a broken instrument from the root canal. A file fractured in the canal blocks further treatment; the kit is made to expose the fragment end, free it around its circumference and draw it out — work done under magnification.ZumaxEndodontic ZirArt 4D Multilayer Zirconia DiscsLodden ZirArt 4D series zirconia discs for milling in CAD/CAM systems. The manufacturer’s top multilayer series: 8 gradient layers, a flexural strength of 700 to 1300 MPa, and shades following VITA16 plus seven more. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.LoddenDental Zirconia ZirArt 3D Multilayer Zirconia DiscsLodden ZirArt 3D series zirconia discs for milling in CAD/CAM systems. The discs are multilayer: the manufacturer states 5 to 6 layers with a gradient shade transition, a flexural strength of 750 to 1200 MPa, and shades following the VITA16 key plus four more. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.LoddenDental Zirconia HT Series Zirconia DiscsLodden HT series zirconia discs for milling in CAD/CAM systems. The manufacturer states a flexural strength of 1350 MPa, which suits the series to posterior work and longer bridges where strength comes before translucency. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.LoddenDental Zirconia ST Series Zirconia DiscsLodden ST series zirconia discs for milling in CAD/CAM systems. The manufacturer states 43%% translucency — a balance of strength and appearance that suits combined anterior and posterior work. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.LoddenDental Zirconia SHT Series Zirconia DiscsLodden SHT series zirconia discs for milling in CAD/CAM systems. The manufacturer states 46%% translucency, one step clearer than the ST series, for work where appearance matters more. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.LoddenDental Zirconia UT Series Zirconia DiscsLodden UT series zirconia discs for milling in CAD/CAM systems. The manufacturer states 49%% translucency — the highest of these series — for anterior restorations where light transmission is the point. They are used for crowns, bridges and monolithic restorations, and require sintering in a furnace before finishing. Supplied to the laboratory by JK Dent.LoddenDental Zirconia Zirconia Colouring LiquidsColouring liquids for zirconia before sintering. The white disc is dipped or brushed, and the shade is set before the furnace — so the colour sits inside the material rather than in an outer layer that wears away.LoddenDental Zirconia Special Effects Coloring Liquid KitA kit of effect liquids for zirconia: cervical shades, incisal translucency and internal characterisation. It is meant for anterior work, where a single tooth has to blend among natural ones rather than read as a flat unit.LoddenDental Zirconia Lithium Disilicate DiscsLodden lithium disilicate discs for milling in CAD/CAM systems. Lithium disilicate is a glass-ceramic for aesthetic restorations: single crowns, veneers and inlays/onlays. The discs are milled in the pre-crystallised state and then given a crystallisation firing, which brings out the final shade and strength. Supplied to the laboratory by JK Dent.LoddenLithium Disilicate Lithium Disilicate Press IngotsLithium disilicate press ingots for the heat-press technique. Lithium disilicate is a glass-ceramic for aesthetic restorations: single crowns, veneers and inlays/onlays. The route starts from a wax pattern, goes through investing, and ends with pressing the heated ingot into the mould — a familiar path for laboratories that prefer shaping by hand over milling.LoddenLithium Disilicate CAD Lithium Disilicate BlocksLithium disilicate blocks for milling in CAD/CAM systems for single restorations. Lithium disilicate is a glass-ceramic for aesthetic restorations: single crowns, veneers and inlays/onlays. The block is milled to final contour, given a crystallisation firing and then glazed. The block format suits single units and is quicker than running a full disc.LoddenLithium Disilicate Lithium Disilicate Block — No SinteringLithium disilicate blocks that need no sintering. Lithium disilicate is a glass-ceramic for aesthetic restorations: single crowns, veneers and inlays/onlays. The manufacturer states the material arrives in its final state, so after milling only finishing and polishing remain — a real saving in laboratory or chairside time.LoddenLithium Disilicate Hybrid Ceramic DiscLodden hybrid ceramic discs: a blend of zirconia and high-performance resin. The manufacturer states a flexural strength of up to 260 MPa and an elastic modulus close to natural dentine. The material needs no sintering — milling and finishing only — so a restoration can be completed in one visit. Available in monolayer and multilayer shades.LoddenOther Blocks & Discs PMMA DiscsPMMA discs for milling in CAD/CAM systems, for temporary crowns and bridges and for denture bases. Discs come in 98 mm and 95 mm diameters and in Sirona and AG formats, in thicknesses of 10–40 mm, in shades following the VITA16 key and in pink and clear. The manufacturer states a flexural strength of 110–140 MPa and a modulus of elasticity of 2500 MPa. Monolayer, multilayer, Impak and flexible versions are available. Supplied to the laboratory by JK Dent.LoddenOther Blocks & Discs PEEK DiscsPEEK discs for milling in CAD/CAM systems — a non-metal alternative for frameworks and substructures. The manufacturer describes the material as light, biocompatible and more flexible than metal, with no metallic shade. Used for partial denture frameworks, superstructures and restorations where metal is to be avoided.LoddenOther Blocks & Discs Wax DiscsWax discs for milling in CAD/CAM systems: for try-ins, for checking fit, and for lost-wax casting work. The wax burns out with no meaningful residue, so the casting takes the shape of the pattern. They are also useful for testing a milling path before running an expensive material.LoddenOther Blocks & Discs Model ResinA resin for printing working models in the laboratory. It replaces stone pouring: the model is built straight from the scan file, so dimensions hold and there is no waiting for stone to set. Suited to fit checking, building on the model and case documentation. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Temporary Restoration ResinA resin for temporary restorations — crowns and bridges for the interim period until the final work. It holds the space, the appearance and the bite while the laboratory works. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Permanent Crowns ResinA resin for permanent crowns in 3D printing. It is intended for definitive restorations rather than interim ones; indications, wall thickness and finishing follow the manufacturer’s guidance. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Fixed Hybrid Dentures ResinA 3D printing resin for fixed hybrid implant dentures. It is used for the printed denture body that seats on a framework, and lets a full structure come straight from the scan file without a stone model. Washing and post-curing per the manufacturer’s instructions are required before finishing.LoddenPrinter Resins Denture Base ResinA resin for printed denture bases. The base prints from the scan and the teeth are set on it — a route that shortens try-in stages and lets the same denture be reproduced from the file if it breaks or is lost. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Flexible Dentures Base ResinA resin for flexible denture bases. The flex lets the base pass mild undercuts without discomfort, which helps patients who struggle with a rigid base. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Tray ResinA resin for custom impression trays. The tray is built to the patient’s ridge, so the impression material sits in an even layer and reads more accurately than a stock tray allows. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Gingiva Mask ResinA resin for a gingiva mask on the working model. The mask reproduces the soft tissue around the implant or preparation, so the technician sees the gingival line while building the restoration, not just hard stone. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins D-Cast ResinA castable resin for printing patterns that burn out in casting. The printed pattern replaces the wax one in the lost-wax route: investing, burnout and metal casting. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Implant Model Resin (High Precision)A resin for high-precision implant models. The model carries the analogs in the exact scanned position, and the superstructure, bridge or denture is checked on it before anything reaches the mouth. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Surgical Guide ResinA resin for implant surgical guides. The guide translates the CBCT plan and carries drilling angle and depth into the mouth. It is a tissue-contact material, so the manufacturer’s sterilisation protocol must be followed. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Ortho Model ResinA resin for printing orthodontic models. The models serve treatment planning, appliance fabrication and staging records — a whole series lives as a file instead of a shelf of stone. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins 4D Clear AlignersA resin for producing clear aligners. Each step of the movement plan is produced as its own aligner, and the patient moves through the steps on the schedule the clinician sets. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Hard Splint ResinA resin for hard splints — night guards for bruxism and splints for joint therapy. A hard splint holds its dimension over time and spreads load across the occlusal surface. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins Soft Splint ResinA resin for soft splints. The softness is easier to tolerate at first and suits short-term use or a patient who cannot bear a hard splint; in return it wears faster. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins IBT ResinA resin for indirect bonding trays in orthodontics. Brackets are positioned on the model in the laboratory and transferred in one tray, so placement is planned in advance rather than decided chairside. Wash and post-cure per the manufacturer’s instructions before use.LoddenPrinter Resins NatureArt Stain and Glaze PasteStain and glaze pastes from the NatureArt range for finishing ceramic restorations. Staining is done on the finished restoration and the glaze seals the surface in a final firing, which is where the gloss and the final appearance come from.LoddenNatureArt Series NatureArt All-Ceramic SetThe NatureArt set for full-ceramic layering: dentine, enamel and effects in one kit for building in layers over a framework or zirconia. It is for laboratories that layer rather than work only monolithically.LoddenNatureArt Series Lab Light-Curing CompositeA light-curing composite for laboratory work: shape corrections, veneering structures and layering outside the mouth. Curing is done in a laboratory light unit that gives consistent time and exposure, not with a chairside lamp.LoddenNatureArt Series Milling Burs — Amann GirrbachLodden milling burs for the Amann Girrbach machine, for cutting zirconia. The geometry matches the tool holders and speeds of Amann Girrbach machines. They are a consumable, replaced according to running hours and to the margin quality the machine produces. JK Dent keeps them in stock.LoddenMilling & Polishing Burs Milling Burs — Sirona MC X5Lodden milling burs for the Sirona inLab MC X5 machine, for cutting zirconia. The MC X5 runs wet and dry; these burs are for its zirconia route. They are a consumable, replaced according to running hours and to the margin quality the machine produces. JK Dent keeps them in stock.LoddenMilling & Polishing Burs Milling Burs — ArumLodden milling burs for the Arum machine, for cutting zirconia. They suit the Arum dry-milling series where zirconia is the main material. They are a consumable, replaced according to running hours and to the margin quality the machine produces. JK Dent keeps them in stock.LoddenMilling & Polishing Burs Milling Burs — imes-icore 350iLodden milling burs for the imes-icore 350i machine, for cutting zirconia. The 350i is a high-throughput laboratory machine; these burs are meant to hold a clean margin across long runs. They are a consumable, replaced according to running hours and to the margin quality the machine produces. JK Dent keeps them in stock.LoddenMilling & Polishing Burs Milling Burs — Roland DWXLodden milling burs for the Roland DWX machine, for cutting lithium disilicate. Glass-ceramic is more brittle than zirconia, so burs for it differ in geometry and grit. They are a consumable, replaced according to running hours and to the margin quality the machine produces. JK Dent keeps them in stock.LoddenMilling & Polishing Burs Milling Burs — vhf N4+Lodden milling burs for the vhf N4+ machine, for cutting lithium disilicate. The N4+ mills wet, and correct coolant during the run is what extends bur life. They are a consumable, replaced according to running hours and to the margin quality the machine produces. JK Dent keeps them in stock.LoddenMilling & Polishing Burs Milling Burs — Ivoclar PM7Lodden milling burs for the Ivoclar PrograMill PM7 machine, for cutting lithium disilicate. The PM7 is a five-axis machine; these burs are for its glass-ceramic route. They are a consumable, replaced according to running hours and to the margin quality the machine produces. JK Dent keeps them in stock.LoddenMilling & Polishing Burs Milling Burs — YenadentLodden milling burs for the Yenadent machine, for cutting lithium disilicate. Intended for the glass-ceramic route on Yenadent machines. They are a consumable, replaced according to running hours and to the margin quality the machine produces. JK Dent keeps them in stock.LoddenMilling & Polishing Burs Fully-Sintered Diamond Burs HPFully sintered diamond burs with an HP shank. Diamond runs through the whole body of the tool rather than sitting on its surface, so fresh grit is exposed as it wears and the cut stays consistent over the tool’s life. Dearer than electroplated, and they last far longer.LoddenMilling & Polishing Burs Electroplated Diamond Burs HPElectroplated diamond burs with an HP shank for the laboratory. The diamond grit is bonded in a single layer, which cuts fast and aggressively for initial shaping of zirconia and ceramic. A single layer wears sooner than a sintered bur, so these are working tools rather than finishing tools.LoddenMilling & Polishing Burs Diamond DiscsDiamond discs for cutting and separating in the laboratory. They come in different thicknesses: thin ones for fine separation between bridge units, thicker ones where rigidity is needed. Working with water or cool air keeps cracks out of the restoration.LoddenMilling & Polishing Burs Tungsten Carbide Burs HPTungsten carbide burs with an HP shank. They are for acrylic, resins and soft metal — in those materials they cut cleaner and faster than diamond and do not clog with swarf.LoddenMilling & Polishing Burs Tungsten Carbide Cutters HPTungsten carbide cutters with an HP shank and a coarse cut for fast stock removal. They belong to the first stage of shaping an acrylic denture or base, before finer tools take over.LoddenMilling & Polishing Burs Ceramic-Bonded Diamond Grinding BursCeramic-bonded diamond grinding burs for zirconia and ceramic. The ceramic bond wears at a controlled rate and keeps exposing fresh grit, so the tool does not load up or overheat the restoration — which matters on sintered zirconia.LoddenMilling & Polishing Burs Diamond Polishers for ZirconiaDiamond polishers for zirconia and full ceramic. They belong to the finishing stage after shaping: they remove scratches and bring gloss back without glazing. A well-polished surface is kinder to the opposing tooth than a rough one.LoddenMilling & Polishing Burs Mounted SandpaperMounted sandpaper rolls on a mandrel. They do the intermediate smoothing on acrylic and resin: they take out the marks of the previous tool and prepare the surface for the polisher and the shine.LoddenMilling & Polishing Burs Polishing BrushesPolishing brushes for the laboratory. With polishing paste they reach the grooves and hollows a rubber polisher skips, which makes them the last step before the work is handed over.LoddenMilling & Polishing Burs Hard Z CutterA Hard Z cutter for sintered zirconia — the hardest material the laboratory touches after the furnace. It is meant for spot adjustments on a finished restoration, where an ordinary tool wears out quickly.LoddenMilling & Polishing Burs Lab Polishers 3LR00.1Laboratory polishers under code 3LR00.1 from Lodden’s tool range. As with the rest of the range, the code is the ordering name and guarantees the same shape and grit again.LoddenMilling & Polishing Burs Lab Polishers 3Z00.1Laboratory polishers under code 3Z00.1 from Lodden’s tool range. The code fixes shape and grit in the manufacturer’s catalogue; ordering by code is how the same tool comes back next time.LoddenMilling & Polishing Burs Lab Polishers 3Z00.3Laboratory polishers under code 3Z00.3 from the same range, differing from 3Z00.1 in shape or grit. Combining several codes across the finishing stages is what gives an even surface with no transition marks.LoddenMilling & Polishing Burs Zirconia Polishing & Grinding KitA toolkit for working and polishing zirconia. It gathers the tools in work order — shaping, smoothing, polishing — so the set need not be assembled piece by piece. Useful for a laboratory starting out in zirconia.LoddenMilling & Polishing Burs Ceramic Firing Paste (Peg Putty)A firing paste for supporting restorations in the furnace. The restoration is held during firing so it neither shifts nor sticks to the tray, and the support comes away easily once cool.LoddenLab Consumables 3D Scanning Developer PasteA scanning paste for glossy or translucent surfaces. A thin, even layer scatters the light so the scanner can read the surface — the answer to polished metal, glass-ceramic and clear models that throw glare and confuse the camera.LoddenLab Consumables Casting Investment RingAn investment ring for casting and pressing. The ring holds the investment around the wax pattern until it sets, and its size decides how many units fit in one cycle.LoddenLab Consumables Soft Ceramic Firing PadA soft firing pad for the furnace tray. The restoration rests on soft fibres that let it contract and expand without local stress, which means fewer distortions and fewer cracks through firing.LoddenLab Consumables Casting Knockout PinA knockout pin for releasing the casting from the investment. It delivers the blow at a controlled point, so the casting comes out without distortion or cracking — better than striking the work directly.LoddenLab Consumables Glaze & Stain Brush PenA brush pen for glazing and staining. It holds the paste and releases it at an even rate, so the layer stays thin and consistent — one pen per shade keeps colours from mixing.LoddenLab Consumables Press Plunger SeparatorA separator for the press plunger. A thin film on the plunger stops it sticking to the investment and to glass-ceramic residue, so it withdraws clean and can be used again.LoddenLab Consumables Round Ceramic Sintering TrayA round ceramic sintering tray for the zirconia furnace. It withstands sintering temperatures and does not react with zirconia, so the restoration is neither discoloured nor stuck to the tray.LoddenLab Consumables Honeycomb Sintering Tray with Ceramic PinsA round honeycomb sintering tray with ceramic pins. The pins hold crowns and bridges at the chosen angle so heat reaches every side while the support touches the smallest possible area — fewer contact marks on the restoration.LoddenLab Consumables Examination kitA basic examination kit: mirror, tweezers and explorer. It is the kit opened at every first visit, and also the one that wears fastest — worth keeping several sets in the sterilisation cycle.DentricsDiagnostic & Examination Extracting Forceps — BlackExtraction forceps with a black finish. The dark coating cuts glare under operatory lighting, and beaks shaped for a tooth group grip the tooth itself. They are made for repeated sterilisation per the manufacturer’s instructions.DentricsExtraction Instruments Tooth Extracting ForcepsExtraction forceps. The beak shape of each forceps matches a particular tooth group, so the grip lands on the tooth and not on the bone around it. Medesy is an Italian manufacturer from Maniago producing dental and surgical instruments in stainless steel, and states ISO 9001, ISO 13485 and CE marking.MedesyExtraction Instruments Pedo tooth extracting forcepsPaediatric extraction forceps. Smaller than adult forceps and shaped for primary teeth: the grip lands on a shorter crown, and the work is done carefully around the permanent tooth germ beneath.Extraction Instruments Root ElevatorA root elevator for loosening the tooth from the periodontal ligament before extraction. Working gradually reduces the force needed at the forceps and protects the bone wall. Medesy is an Italian manufacturer from Maniago producing dental and surgical instruments in stainless steel, and states ISO 9001, ISO 13485 and CE marking.MedesyExtraction Instruments LM-Arte Set, 5 pcsA five-instrument set — the core of the line, the tools that come back in almost every anterior restoration. LM-Arte is a line of instruments for aesthetic restoration from LM-Dental of Finland, developed with the StyleItaliano group. The manufacturer states LM-DuraGradeMax steel with a non-stick finish, and each instrument is colour-coded and named after its function. The five-piece set is the core of the line — the instruments that come back in almost every anterior restoration.LMArteRestorative & Composite Instruments LM-Arte Set, 7 pcsA seven-instrument set covering the stages of anterior composite build-up: placing, shaping, modelling and finishing. LM-Arte is a line of instruments for aesthetic restoration from LM-Dental of Finland, developed with the StyleItaliano group. The manufacturer states LM-DuraGradeMax steel with a non-stick finish, and each instrument is colour-coded and named after its function. The seven-piece set covers the stages of anterior composite build-up: placing, shaping, modelling and finishing.LMArteRestorative & Composite Instruments Gracey Curette SetA set of Gracey curettes for periodontal therapy. Each curette is made for a different area of the mouth, and its blade angle reaches the root below the gum line without injuring the tissue. Medesy is an Italian manufacturer from Maniago producing dental and surgical instruments in stainless steel, and states ISO 9001, ISO 13485 and CE marking.MedesyEndodontic Composite Instrument KitA kit of composite instruments for direct build-up: spatula, condenser and shaping tools for layered work. Surfaces the composite does not stick to are what allow shaping without dragging the previous layer. Medesy is an Italian manufacturer from Maniago producing dental and surgical instruments in stainless steel, and states ISO 9001, ISO 13485 and CE marking.MedesyRestorative & Composite Instruments sinus lift KitA sinus lift kit for gaining bone height in the posterior maxilla before implant placement. It holds the instruments for reaching the sinus floor and elevating the membrane carefully, since tearing the membrane is the main complication of the procedure.Oral Surgery Instruments Micro-surgery KitAn oral microsurgery kit. Very fine instruments for work under a microscope or loupes: small incisions, gentle tissue handling and fine suturing — an approach that shortens healing.Oral Surgery Instruments micro mirror kitA micro-mirror kit for endodontics. The small mirrors enter the access cavity and show the chamber floor and the canal orifices — what direct vision cannot reach even under magnification.Endodontic RetractorA retractor for holding cheek, lip or tissue flap away from the working area. An open, steady field is a condition for proper vision and for documented photography, and it also reduces tissue injury during the procedure.Handpieces Rubber Dam KitA rubber dam kit for isolating the working field. Isolation keeps saliva and moisture away from bonding, protects the airway from a dropped instrument and improves visibility — standard practice in endodontics and adhesive restorations.Rubber Dam & Isolation Instruments Surgery KitAn oral surgery kit. It gathers the instruments of a routine surgical procedure — exposure, flap reflection, bone work and suturing — in one set that is sterilised together and arrives ready for the room.Oral Surgery Instruments CASTROVIEJO NEEDLE HOLDERSA Castroviejo needle holder for microsurgery. A slim body and fine jaws suit thin sutures placed under magnification, as in plastic periodontal surgery and tissue grafting.Suturing Instruments Mathieu Needle HolderA Mathieu needle holder. Its ratchet opens and closes with a squeeze of the palm, so the needle can be gripped and released without changing hand position — an advantage when suturing deep in the mouth.Suturing Instruments needle holdersA needle holder for intraoral suturing. Serrated jaws hold the needle at a fixed angle so the stitch passes through tissue in one arc — a loose grip is what bends needles.Suturing Instruments Crown RemovalA crown and bridge removal kit. It gathers the means to release a cemented restoration — gripping, loosening and lifting — for work that aims to spare both the tooth and the restoration itself.Prosthodontic Instruments Automatic Crown RemoverAn automatic crown remover. It releases a cemented crown or bridge with a controlled impulse along the path of insertion, instead of a hand pull that can fracture the tooth or the restoration. Useful when the same crown is meant to go back.Prosthodontic Instruments ANESTHESIA SYRINGEA dental cartridge (carpule) anaesthetic syringe. The plunger locks into the bung so the operator can aspirate and confirm the needle is not inside a vessel before injecting — the safety step that sets a dental syringe apart from an ordinary one.Anesthesia Instruments ScissorSurgical scissors for intraoral work. They cut sutures, trim soft tissue and shape membranes. Blade length and a straight or curved tip are chosen by how the site is approached.Oral Surgery Instruments Blade HandleA surgical blade handle. The blade is changed every time and the handle stays, so its shape and balance are what govern control of the incision — the number 3 handle is the common one in oral surgery.Oral Surgery Instruments TofflemireA Tofflemire matrix retainer for posterior restorations. The band forms a temporary wall where one is missing, so composite or amalgam is packed against a surface and a proper contact with the neighbouring tooth is formed.Matrix & Restorative Accessories dental condenserA condenser for packing restorative material into the cavity. Proper condensation drives out air voids and adapts the material to the walls — which reduces post-operative sensitivity and marginal leakage.Restorative & Composite Instruments Osseodensification Burs KitAn osseodensification bur kit. The bur runs in reverse and compacts bone against the walls of the osteotomy instead of cutting it away, so the bone around the implant stays denser — an approach that suits soft bone in particular.Implantology & Bone Surgery Instruments Bondent M3. Pro Gold -protaper sysBondent M3. Pro Gold 25mm -protaper sysBondentEndo Files Bondent M3. Pro Gold- Taper sysBondentEndo Files Bondent (Retreatment) M3.RTBondentEndo Files Bondent SuPliable(Blue)BondentEndo Files Bondent M3.MAXBondentEndo Files Bondent Stainless Steel K FilesStainless Steel K FilesBondentEndo Files Bondent Stainless Steel C FilesBondentEndo Files Eighteeth E-FLEX goldEighteethEndo Files Eighteeth E-FLEX BLUEEighteethEndo Files V-TAPER GOLDFanta Endo Files- V-TAPER GOLDFantaEndo Files AF ROTARYFanta Endo Files-AF ROTARYFantaEndo Files C-PATHFanta Endo Files- C-PATHFantaEndo Files AF BABYFanta Endo Files- AF BABYFantaEndo Files AF MAXFanta Endo Files- AF MAXFantaEndo Files Bondent Irrigation NeedleBondentEndodontic Fanta Irrigation NeedleFantaEndodontic Bondent StopperBondentEndodontic Fanta PluggerFantaEndodontic Bondent Micro OpenerBondentEndodontic Bondent Micro ShaperBondentEndodontic Bondent PluggerBondentEndodontic Bondent Hand Files HolderBondentEndodontic Bondent Measure RulerBondentEndodontic Bondent Endo BoxBondentEndodontic Bondent Endo Clean BoxBondentEndodontic Maruchi Endoseal Bioceramic Sealer 3gMARUCHIRoot Canal Supplies Maruchi Cleanical 2gMARUCHIRoot Canal Supplies Maruchi Endocem MTA 2gMARUCHIRoot Canal Supplies Bondent Gutta Percha PointsBondentRoot Canal Supplies Fanta Gutta PerchaFantaRoot Canal Supplies Fanta Warm Gutta PerchaFantaRoot Canal Supplies Bondent Paper PointsBondentRoot Canal Supplies Fanta Paper PointFantaRoot Canal Supplies Eighteeth E-Root GapSealEighteethRoot Canal Supplies Eighteeth E-Root DamEighteethRoot Canal Supplies Eighteeth E-Root SPEighteethRoot Canal Supplies Eighteeth E-Root BPEighteethRoot Canal Supplies Fanta 3D ToothFantaEndodontic