D-Series 3D Printer
Lodden
A family of 3D printers for lab and clinic: D158 and D160 use DLP at 2560×1440 with 62 μm XY accuracy, while the DJ89 Plus uses LCD at 8K with 29 μm for fine work. 405 nm light source, layer thickness from 1 μm, and 1–4 seconds per layer. The software carries a dental algorithm with automatic nesting on the platform, and supports model resin, castable wax, rigid, high-toughness and biocompatible resins. Supplied, installed, staff-trained and maintained by JK Dent.
Technical specification
- Models
- D158 · D160 · DJ89 Plus
- Technology
- DLP (D158/D160) · LCD (DJ89 Plus)
- Resolution
- 2560×1440 · 7680×4320 (DJ89 Plus)
- XY accuracy
- 62 μm · 29 μm (DJ89 Plus)
- Layer thickness
- 25–100 μm · 1–100 μm (DJ89 Plus)
- Wavelength
- 405 nm
- Control screen
- 5 inch
- Speed
- 1–4 s per layer
- Connectivity
- disk / Wi-Fi
- Operating system
- Windows 7+ x64, Mac
- Resins
- model, castable wax, rigid, high-toughness, biocompatible
Figures as published by the manufacturer. Further detail by configuration — talk to us.
More in this category
HeyMill W19Five-axis wet milling machine for hard materials: grade-5 titanium, cobalt-chrome, glass-ceramics and polymers. Two spindle modes — quick and high-power — move it between fine finishing and metal cutting on the same machine. It takes round disks, blocks and pre-milled titanium columns, and is aimed at angled multi-unit abutments and precision screw-retained work. JK Dent installs it in the lab, trains the team and services it.
HeyMill D18Five-axis dry milling machine with no compressor — the lab needs no compressed-air infrastructure. A 60,000 rpm spindle, an automatic ten-bur changer and milling accuracy down to one micron. It monitors bur life, alarms on breakage, and resumes from the breakpoint after an interruption, so a whole disc is not lost mid-job. JK Dent installs it in the lab, trains the team and services it.
W16Five-axis hybrid milling machine — wet and dry in one unit, so a single lab covers zirconia, wax, resin, glass-ceramics, titanium, pre-milled blanks and soft metals without splitting the work between two machines. High-power water-cooled spindle, tool-life monitoring and job recovery after a power cut. Compatible with mainstream CAM systems. Supplied, installed, staff-trained and maintained by JK Dent.
HeyTemp TSTS-series zirconia sintering furnace with high-purity Elema heating elements. It pre-dries the restoration and clears residual moisture before the sintering cycle, so no preheating is needed and work can go straight in. Fast and slow sintering are combined; in fast mode — with silicon-carbide heating rods — sintering time drops to about an hour. Up to 150 units per cycle, with no metal-ion contamination. Supplied, installed, staff-trained and maintained by JK Dent.
Contact us
A site visit, measurements, and a first plan with a price range. No commitment.
Leave a detailed message
Even outside business hours — we will get back to you.