Denture Base Resin
Lodden
A resin for 3D printing denture bases — the part that carries the teeth and rests on the ridge, printed straight from the digital design. The base is printed from the design and the teeth are bonded to it, and the file is kept for reprinting. According to the manufacturer the resin is designed for digitally fabricated denture bases. Confirm that it is compatible with the printer in use. Washing and post-curing follow the manufacturer’s instructions.
Key features
- Printed from the digital design — in place of conventional flasking and processing
- For standard (non-flexible) bases — Lodden offers a separate flexible denture-base resin
- The file is saved — the same denture can be remade if broken or lost
- Part of Lodden’s digital-denture line, alongside temporary and permanent-crown resins
Technical specifications
- Type
- photopolymer resin for denture bases
- Print layer height
- 0.05 mm
- Wash
- IPA (isopropyl alcohol) — 3 + 3 min (rough, then fine)
- Post-curing
- double-sided · 10–50 mW/cm² · 5 min · 45 °C recommended
Data as published by the manufacturer. Details vary by configuration — talk to us.
More in this category
Model ResinA resin for printing dental models on a 3D printer — the digital alternative to pouring stone. The model is built straight from the scan file, with no mixing, pouring or waiting for it to set.
Temporary Restoration ResinA resin for 3D printing temporary restorations — interim crowns and bridges printed straight from the digital design.
Permanent Crowns ResinA ceramic-filled resin for 3D printing permanent crowns — for the definitive restoration, not the interim one.
Fixed Hybrid Dentures ResinA resin for printing fixed hybrid dentures — full-arch implant restorations in which teeth and gums form one piece, screwed onto the implants.
Contact us
A site visit, measurements and an initial plan with a price range — no obligation.
Leave a detailed message
Even outside business hours — we will get back to you.