Equipment, instruments and materials
The full catalog.
Everything we actually supply and install — by category. Equipment is installed, connected, acceptance-tested and covered by a service contract.
S500An integrated dental unit for daily work and precise procedures — including minimally invasive treatment and work under a microscope. The dentist and the assistant each have a master control panel that runs the whole unit.
ST-D307A complete dental unit — chair, dentist element, assistant unit, cuspidor and operating light — for diagnosis, treatment and surgery in the clinic. The U-series eco-leather upholstery comes in 12 colors.
E200BAn integrated dental unit from the E200 series, with an independent column that carries the dentist element, operating light and arms. The dentist and the assistant have identical touch panels, each controlling the chair, the light and the cuspidor.
ST-D303A complete dental unit — chair, dentist element with hanging hoses, assistant unit, cuspidor and light — for diagnosis, treatment and surgery. The standard upholstery is seamless PU in 10 colors.
E200CAn integrated E200-series dental unit in which the dentist element and the operating light mount on the water unit beside the chair. The dentist and the assistant have identical control panels, each running the chair, the light and the cuspidor.
New
FinScan F350A combined imaging system — CBCT, panoramic and cephalometric — for examining the teeth, jaws and TMJ in adults and children.
CBCT-1030 ProA 2-in-1 dental imaging unit that combines cone-beam computed tomography (CBCT), digital panoramic imaging and 3D cephalometrics. Fields of view range from 5 × 5 to 16 × 18 cm — from a focused area for root canal treatment to a full jaw for implant planning.
HyperLight MA portable intraoral X-ray unit with sensor-positioning guidance: the screen shows distance, centering and angle to the sensor in real time.
HyperLight-AA portable intraoral X-ray unit that weighs only 1.0 kg — light enough for comfortable one-handed operation in any treatment room.
HyperLightA portable intraoral X-ray unit: a handheld source for chairside radiographs with a digital sensor, phosphor plate or film — no X-ray room needed.
HyperLight GA cordless, handheld intraoral X-ray unit for imaging with a digital sensor or phosphor plate in any treatment room.
OneFit Sensor Holder SystemA sensor holder system for intraoral X-rays: an aiming ring, a bite arm and clips that align the sensor with the X-ray cone anywhere in the mouth.
NanoPix-MA digital intraoral sensor with a built-in M-TECH chip that guides exposure positioning in real time with the HyperLight-M X-ray unit.
NanoPixA digital intraoral sensor that replaces film: the image appears on the computer screen seconds after exposure, with no processing and no consumables.
NanoPix-E 1.3A digital intraoral sensor that replaces film: the image transfers to the computer after exposure, with no film processing and no chemicals.
F220 Phosphor Plate ScannerA phosphor plate (PSP) scanner for intraoral X-rays: the plate is exposed like film, then the scanner reads it and sends the digital image to the clinic computer.
Lead ApronA radiation-protective apron with a lead or lead-equivalent layer that covers the front of the body during dental X-ray imaging. It is used according to the clinic’s radiation-safety instructions.
Helios 700A wireless intraoral scanner: the handpiece links to the PC over dedicated WiFi, with no cable pulling on the hand at any angle.
Helios 500A wired intraoral scanner that replaces the conventional impression with a digital scan, sent as a file straight to the lab.
HeyInScan S5An intraoral scanner that records teeth and gingiva digitally instead of an impression, for crowns, bridges and dentures, with scans sent to the lab.
Orion Scan Body KitA kit of coded scan bodies for digital impressions in multi-implant and edentulous cases, seated on multi-unit abutments (MUAs). It combines Helios intraoral scanning with 3D photogrammetry in one workflow.
G4 Pro (DOM4000E)A dental surgical microscope with a built-in 4K camera, for work under magnification in endodontics, restorative dentistry and surgery. Continuous zoom from 3.6× to 23.3× and an electronically focused objective with a 200–550 mm working distance.
DOM 3000D-4k PROA dental surgical microscope with a built-in 4K camera for diagnosis and treatment in endodontics, implants, periodontics and esthetic prosthodontics. Continuous zoom from 3.6× to 23.3× and an objective with a variable working distance of 180–460 mm.
MCS 3000AA dental microscope on a mobile stand for endodontics, restorative work and surgery — with five magnification steps from 3.2× to 20×.
OMS2380A dental microscope with continuous zoom from 1.8× to 19.4× for endodontics, restorative work and surgery — magnification changes smoothly.
OMS2350A dental microscope with a six-step magnification changer for endodontics, restorative work and surgery — from a whole-arch view to close examination.
Acuvision X1An apochromatic dental microscope for endodontics, restorative work and microsurgery, with 1.6×–18.8× magnification and a variable-focus objective.
Brilliance 3xFlip-up 3.0× loupes for general dentistry — magnification that reveals fine detail while keeping a wide field of view.
Brilliance 3.5xFlip-up 3.5× loupes for work that calls for finer detail — root canal treatment, subgingival margins and precise restorations.
Brilliance 48° Pro5× loupes with the optical path deflected 48° downward — so the treatment field is seen at high magnification while the head and neck stay upright.
Softouch Loupe Light SourceA wired LED headlight for loupes: an 8 g lamp clips to the frame and lights the treatment field along the line of sight. The battery unit clips to a belt or pocket.
Wireless Z HeadlightA cordless LED headlight for loupes: the battery sits on the light body itself, so no cable runs from the loupes to a belt pack.
AEOLUS-750LA suction motor with a built-in water–air separator that powers the dental unit’s suction, drawing off saliva, blood, debris and turbine aerosol.
AEOLUS-370X Portable SuctionA mobile suction unit on castors, with a high-volume suction hose and a saliva ejector, for a treatment chair with no connection to central suction.
New
IMPNAVA dynamic navigation system for dental implant surgery that guides the drill in real time against the implant plan made on the CT scan. During surgery an optical tracking camera follows the handpiece tip, and the screen shows the drilling position, angle and depth against the plan in 3D.
Aurora-SA combined dental laser on a mobile cart: Er:YAG at 2940 nm plus diode wavelengths of 980, 650 and 450 nm, for hard tissue, soft tissue and bone. The manufacturer lists more than 80 indications.
iLaser I ProA desktop diode laser with three wavelengths — 450, 650 and 980 nm — for soft-tissue surgery, perio, endo and peri-implant procedures.
iLaser I PlusA desktop diode laser with three wavelengths — 450, 650 and 980 nm — for soft-tissue surgery, endo and perio, photobiomodulation and whitening.
iLaser IA desktop 980 nm diode laser for soft-tissue surgery, periodontal treatment and root canal disinfection — cutting and coagulating in the same pass.
iLaser IIA pen-style 980 nm diode laser for soft-tissue surgery, periodontal treatment and root canal disinfection — with no desktop unit and no cable.
MotorSurgA surgical implant motor with an irrigation pump and a color touchscreen, for drilling, tapping and placing implants at a controlled 5–80 Ncm.
B1A piezoelectric surgery unit for bone cutting, implant site preparation, sinus lift and extractions, with working modes for endo and perio as well.
E-FLOWA computer-controlled local anesthetic delivery system (CCLAD) that injects at a steady, controlled rate and displays pressure and remaining volume.
Smart IA pen-style electronic local-anesthesia injector with three injection modes — fast, slow and periodontal-ligament (PDL) — for a 1.8 mL cartridge.
Smart IIA light pen-style electronic local-anesthesia injector with computer-controlled constant flow (CCLAD) and three speed modes — fast, slow and PDL.
NanoMotorA cordless brushless endo motor, 95 g with contra-angle, for canal shaping in six modes, including continuous rotation and reciprocation.
E-value EA cordless endo motor for canal shaping in continuous rotation, reciprocation or ATC mode, with a one-piece 1:1 contra-angle that rotates 360°.
E-xtremeA lightweight cordless endo motor — 99 g — with a miniature contra-angle, for canal shaping in continuous rotation and reciprocation.
E-CONNECT SEA cordless endo motor for rotary and reciprocating shaping that links by cable to the E-PEX apex locator and shows the file position on its display.
E-connect SA cordless endo motor with a built-in apex locator: one device shapes the canal and monitors working length in real time, in continuous rotation or reciprocation.
FindPexA multi-frequency apex locator for working-length measurement in root canal treatment, with ASW technology and a 3.5-inch color display.
E-PEXA multi-frequency apex locator for working-length measurement in root canal treatment, with a 3.5-inch LCD display and automatic calibration.
Ultra XA cordless ultrasonic activator for canal irrigation: its fine tip agitates the irrigant to improve cleaning and disinfection before obturation.
SurfyOneA cordless sonic activator for canal irrigation: a brushless motor vibrates a flexible polymer tip that moves the irrigant inside the canal.
UltraMint ProAn ultrasonic scaler for scaling, perio and endo work, with a stand-alone 900 mL liquid bottle and an external water supply option.
Space-Pack & Space-FillA cordless two-pen system for warm vertical obturation — Space-Pack for the down-pack and Space-Fill for the backfill. Space-Pack heats, softens and sears off the gutta-percha master cone, and Space-Fill heats gutta-percha and injects it into the cleaned, shaped canal.
Fast-Pack ProA cordless heat pen for the down-pack phase of warm vertical obturation — it heats, softens and sears off the gutta-percha master cone.
Fast-FillA cordless injection pen for the backfill phase of warm vertical obturation — it heats gutta-percha and injects it into the cleaned, shaped canal.
OPUS CartA prophylaxis unit that combines an ultrasonic scaler and an air polisher in one console on a mobile cart, for removing calculus, biofilm and stain. The ultrasonic side runs the NEWTRON Slim B.LED handpiece with more than 70 tips for prophylaxis, periodontal therapy, implant maintenance and endodontics; the polishing side runs the SILKY Pen with four nozzles, above and below the gum line.
Air PolisherAn air-powder polisher that connects directly to the dental unit’s 4-hole high-speed connector, for removing stain and biofilm (plaque).
MotorTurboA brushless electric micromotor with a compact control unit that drives 1:5, 1:1, 16:1 and 20:1 contra-angles from the same unit.
IMIX-M3A benchtop capsule mixer (amalgamator) that mixes amalgam capsules at a set time and speed — a uniform mix that does not depend on hand technique. Time and speed are preset and shown on a digital LED display.
LED Whitening Light on a Mobile StandAn LED light for in-office teeth whitening, on a mobile stand with an adjustable arm. It is a blue light source used alongside a professional whitening gel.
CuringPen-XA four-LED curing light (380–515 nm) for curing restorative materials and bonding orthodontic brackets, with violet- and white-light detect modes.
CuringPenA pen-style LED curing light with four LEDs — three blue and one violet — for curing restorative materials and violet-light caries detection.
CuringPen-EA pen-style LED curing light with a broad 380–515 nm spectral range and up to 3000 mW/cm², for curing composites and resin-based restoratives.
E-Sanit 23A 23-liter steam autoclave with EN 13060 type B cycles, for wrapped, unwrapped and hollow instruments, handpieces and textiles in the dental clinic.
Tanda Pro 18LAn 18-liter Class B benchtop steam autoclave for sterilizing solid and hollow instruments, wrapped and unwrapped, and porous materials. In the Class B programs, three pre-vacuum pulses remove air from the chamber and from lumens before steam enters, and each cycle ends with vacuum drying.
Sterilization Pouch SealerA heat sealer for sterilization reels: it seals instruments into pouches before the autoclave, so they stay sterile until opened at the chair.
Water DistillerA countertop water distiller that makes distilled water in the clinic — mainly for the autoclave, and for other equipment that requires it.
Handpiece Oiling MachineAn automatic oiler for turbines and contra-angles: it drives oil and compressed air through the handpiece’s inner channels before sterilization.
HeyMill W19A five-axis wet mill for metal and ceramic restorations: titanium, cobalt-chrome, glass-ceramics and high-performance polymers on one machine.
HeyMill D18A five-axis dry mill that runs without an external air compressor — for zirconia, PMMA, PEEK and wax: crowns and bridges, temporaries and frameworks.
HeyMill W16A five-axis hybrid milling machine — wet and dry in one unit, for zirconia, resin, wax, glass-ceramics, titanium, pre-milled blanks and soft metals.
HeyTemp TSA series of three zirconia sintering furnaces — from a fast cycle of about an hour to a standard cycle of up to 150 units.
HeyTemp T5MA compact porcelain furnace for finishing firings in the lab: glass-ceramic crystallization, glazing, porcelain firing, corrections and staining.
HeyTemp T6IA press furnace for glass-ceramic restorations pressed from ingots — which also works as a porcelain furnace thanks to its many built-in programs.
D-Series 3D PrinterA DLP 3D printer for the lab and clinic — the D158 and D160 — for printing models, aligner models, surgical guides and temporary restorations.
CD-X3A 3 L ultrasonic cleaning bath for 3D-printed parts — it removes uncured resin from surfaces and crevices before final post-curing.
UV02A post-curing unit for 3D-printed parts with three wavelengths — 365, 385 and 405 nm — each controlled independently.
INOX Chairside 3D PrinterA chairside resin 3D printer built for nano-filled dental materials — part of the INOX system for printing permanent restorations in the clinic.
INOX N1 LED & Nitrogen Curing MachineAn LED post-curing unit with a nitrogen system for printed parts and resin work — nitrogen displaces oxygen from the chamber so the surface cures too.
New
Nanoksa G-Plus High-Performance Polymer DiscA CAD/CAM milling disc of high-performance polymer filled with nano-zirconia and carbon, for permanent restorations on implants. The manufacturer indicates it for full-arch work, bridges, restorations on implants and Richmond crowns.
Nanoksa G-Plus Resin for Permanent RestorationsA 3D printing resin for permanent restorations: veneers, inlays, onlays and single crowns. It is the printable form of Nanoksa G-Plus, which also comes as a milling disc — the same high-performance polymers with nano-zirconia and nano-carbon.
PEKK-ALLIED Resin for Prosthetic FrameworksA 3D printing resin for prosthetic frameworks: denture bases, partial denture frameworks and implant-supported structures such as All-on-4 and All-on-6. The manufacturer places it in the PEKK family of high-performance polymers.
Nanoksa Direct Clear Aligners ResinA resin for printing clear aligners directly on a 3D printer — with no printed models and no thermoformed PETG sheets.
Nanoksa Flexible Denture ResinA 3D printing resin for flexible partial dentures — removable prostheses that replace several missing teeth and flex with the movements of the mouth.
Nanoksa Gingiva KitA light-cured gingival composite kit for rebuilding pink tissue — on implant work and partial dentures, and for characterizing acrylic dentures. The kit covers every build-up layer: opaque and opaque modifier to cover the framework, three Body shades to build the tissue and three modifiers for characterization.
Nanoksa LAB CompositeA light-cured laboratory composite for indirect restorations: crowns and bridges, inlays, onlays and veneers. According to the manufacturer, it combines a nano-particle and zirconium filler with a urethane dimethacrylate matrix.
Nanoksa StainsCharacterization stains for direct and indirect composite restorations and for masking discoloration — eight colors in ultra-fine-tip syringes.
Dual Cure Composite Luting CementA dual-cure composite luting cement for final cementation of crowns, bridges, implant restorations, inlays, onlays, veneers and posts. It sets under light and also chemically, so it cures where light cannot reach.
Bond Enhancers and PrimersSurface primers that improve the bond between composite or resin cement and restoration surfaces: porcelain, metal, plastic and resin. A line of four primers, each in a 10 ml bottle and each for a different surface.
Nanoksa Gingiva body syringeThe Body paste of the Nanoksa Gingiva composite: the layer that builds the volume of the pink tissue and its base shade, over the opaque.
Nanoksa Gingiva Modifier SyringeThe modifier gel of the Nanoksa Gingiva composite: the characterization layer over the Body, for matching the shade to the patient’s own gingiva.
Nanoksa Gingiva Opaque ModifierAn opaque modifier for the Nanoksa Gingiva system: it changes the shade of the masking layer itself, under the pink tissue.
Nanoksa Gingiva OpaqueThe gingival opaque of the Nanoksa Gingiva system: the first, masking layer that covers the framework — metal, zirconia or polymer — before the pink tissue is built.
Broken Instrument Removal KitA kit for retrieving a separated file or instrument from the root canal. Micro-trephines expose the end of the fragment, and an extractor tip grips it and draws it out.
ZirArt 4D Multilayer Zirconia DiscsMultilayer zirconia discs for CAD/CAM milling, with 8 layers grading in shade, translucency and strength for monolithic anterior and posterior work. The manufacturer states translucency rising from 43% at the cervical to 57% at the incisal edge, and flexural strength reaching 1300 MPa at the cervical.
ZirArt 3D Multilayer Zirconia DiscsMultilayer zirconia discs for CAD/CAM milling, for crowns, bridges and monolithic work. The 5 or 6 layers grade in shade, translucency and strength. The manufacturer states flexural strength of 750–1200 MPa and translucency of 43–51%, depending on the model.
HT Series Zirconia DiscsHigh-strength zirconia discs for CAD/CAM milling, for posterior crowns, multi-unit bridges, full arches and implant work where strength comes first. The manufacturer states a flexural strength of 1350 MPa and 37% translucency.
ST Series Zirconia DiscsZirconia discs for CAD/CAM milling that balance strength and translucency, for a wide range of restorations. The manufacturer states a flexural strength of 1200 MPa and 43% translucency.
SHT Series Zirconia DiscsHigh-translucency zirconia discs for CAD/CAM milling, for monolithic restorations where appearance leads. The manufacturer states 46% translucency and 1000 MPa flexural strength for the single-layer versions.
UT Series Zirconia DiscsUltra-translucent zirconia discs for CAD/CAM milling, for esthetic monolithic restorations — anterior crowns, veneers and inlays/onlays. The manufacturer states 49–57% translucency and flexural strength of up to 800 MPa.
Zirconia Coloring LiquidsWater-based coloring liquids for white zirconia, infiltrated into the milled restoration before sintering. They set the shade on the VITA classical scale (A1–D4). The manufacturer states the liquid is designed for deep infiltration and that the color is fixed by the high-temperature firing.
Special Effects Coloring Liquid KitA kit of effect liquids for characterizing zirconia before sintering, for monolithic restorations and gingival ceramics. The liquids create details that standard shade liquids cannot: pigmented pits and fissures, chalky spots, tetracycline staining, a fluorosis look and blood vessels in soft tissue.
Lithium Disilicate DiscsLithium disilicate glass-ceramic discs for milling on open CAD/CAM systems, for esthetic restorations — crowns, veneers and inlays/onlays. The disc is 98 mm in diameter, in two translucencies (HT and LT) and 20 shades.
Lithium Disilicate Press IngotsLithium disilicate ingots for the heat-press technique, for veneers, inlays/onlays and anterior and posterior crowns. They come in three translucencies (HT, MT, LT) and 20 shades.
CAD Lithium Disilicate BlocksLithium disilicate glass-ceramic blocks for CAD/CAM milling of veneers, inlays/onlays, crowns and bridges of up to 3 units. The manufacturer states a flexural strength of 637 MPa after crystallization.
Lithium Disilicate Block — No SinteringLithium disilicate glass-ceramic blocks for CAD/CAM milling that need no sintering, for single restorations the patient needs quickly. The block is supplied tooth-colored, and the manufacturer designates it for immediate restorations.
Hybrid Ceramic Discs and BlocksHybrid ceramic for chairside CAD/CAM milling with no sintering, for crowns, inlays/onlays and veneers, according to the manufacturer. It is a composite of resin and ceramic filler, and the manufacturer states a flexural strength of 260 MPa and an elastic modulus close to natural dentin.
PMMA DiscsPMMA discs for CAD/CAM milling of temporary crowns and bridges, dentures, splints and surgical guide molds. For the high-strength version, the manufacturer states a flexural strength of 110–140 MPa and an elastic modulus of 2500 MPa.
PEEK DiscsPEEK (polyether ether ketone) discs for CAD/CAM milling of metal-free frameworks. Typical uses for this light, strong engineering polymer are partial denture frameworks, implant superstructures and crown and bridge frameworks for veneering.
Wax DiscsWax discs for CAD/CAM milling of wax patterns for crowns and bridges — for pressing and lost-wax casting — and of diagnostic models. The manufacturer states that the wax burns out cleanly with no residue and melts at 112°C.
Model ResinA resin for printing dental models on a 3D printer — the digital alternative to pouring stone. The model is built straight from the scan file, with no mixing, pouring or waiting for it to set.
Temporary Restoration ResinA resin for 3D printing temporary restorations — interim crowns and bridges printed straight from the digital design.
Permanent Crowns ResinA ceramic-filled resin for 3D printing permanent crowns — for the definitive restoration, not the interim one.
Fixed Hybrid Dentures ResinA resin for printing fixed hybrid dentures — full-arch implant restorations in which teeth and gums form one piece, screwed onto the implants.
Denture Base ResinA resin for 3D printing denture bases — the part that carries the teeth and rests on the ridge, printed straight from the digital design.
Flexible Dentures Base ResinA resin for 3D printing flexible denture bases — for dentures whose base needs to flex, not just carry the teeth.
Tray ResinA resin for printing custom impression trays — a tray built to the patient’s arch instead of a stock tray.
Gingiva Mask ResinA resin for printing a gingiva mask — a replica of the soft tissue around implants or preparations on the working model.
D-Cast ResinA castable resin for printing patterns that burn out in the furnace — the digital counterpart of wax carving in the lost-wax technique.
Implant Model Resin (High Precision)A resin for printing high-precision implant models — models that carry digital analogs at the implant positions as scanned.
Surgical Guide ResinA resin for printing implant surgical guides — they carry the planned implant position, angle and depth into the mouth.
Ortho Model ResinA resin for printing orthodontic models — study models, a model for every step of an aligner plan, and models for appliance fabrication.
4D Clear Aligner ResinA resin for printing clear aligners directly — the aligner itself is printed from the file, with no model and no thermoformed sheet.
Hard Splint ResinA resin for printing hard splints — stabilization splints, night guards for bruxism and splints for TMJ therapy.
Soft Splint ResinA resin for printing soft splints — for splints and night guards where wearing comfort comes before rigidity.
Indirect Bonding Tray (IBT) ResinA resin for printing indirect bonding trays (IBT) in orthodontics — a tray that transfers every bracket in the arch in one step.
NatureArt Stain and Glaze PasteStain and glaze pastes for color characterization and finishing of ceramic restorations. The range runs from the base shade through effects to the final gloss in the furnace.
NatureArt All-Ceramic Stain & Glaze SetA stain and glaze kit for all-ceramic restorations: NatureArt pastes in base and effect shades, with liquids and brushes, in one box.
Lab Light-Curing Gingiva CompositeA light-curing composite system for building the gingival part of restorations: 17 shades in syringes, opaquers included, with a primer and working liquids.
Zirconia Milling Burs for Amann GirrbachZirconia milling burs for Amann Girrbach mills, DC-coated on a D3 shank: six tools from bulk removal to fine detail and flat surfaces.
Zirconia Milling Burs for Sirona MC X5Zirconia milling burs for the Sirona inLab MC X5: three DC-coated tools on a D3 shank, from bulk removal to fine detail.
Zirconia Milling Burs for ArumZirconia milling burs for Arum mills: three DC-coated tools on a D4 shank for milling zirconia restorations.
Zirconia Milling Burs for imes-icore 350iZirconia milling burs for the imes-icore CORiTEC 350i: three DC-coated tools on a D6 shank, from bulk removal to fine detail.
Lithium Disilicate Milling Burs for RolandDiamond-grit milling burs for lithium disilicate on Roland DWX mills: four tools on a D3 shank, from rough shaping to a pointed tip for detail.
Lithium Disilicate Milling Burs for vhf N4+Diamond-grit milling burs for lithium disilicate on the vhf N4+: three tools on a D3 shank for glass-ceramic restorations.
Lithium Disilicate Milling Burs for Ivoclar PM7Diamond-grit milling burs for lithium disilicate on the Ivoclar PrograMill PM7: four tools on a D6 shank.
Lithium Disilicate Milling Burs for YenadentDiamond-grit milling burs for lithium disilicate on Yenadent mills: three tools on a D4 shank.
Fully-Sintered Diamond Burs HPFully sintered diamond burs with an HP shank for lab work — for grinding and polishing, and, according to the manufacturer, especially for metal.
Electroplated Diamond Burs HPElectroplated diamond burs with an HP shank, for grinding and polishing ceramics in the lab, according to the manufacturer.
Diamond DiscsDiamond discs for cutting, separating and shaping in the dental lab, mounted on a screw mandrel.
Tungsten Carbide Burs HPTungsten carbide burs with an HP shank for shaping and trimming in the lab, in round, inverted-cone, cylinder and taper shapes.
Tungsten Carbide Cutters HPTungsten carbide cutters with an HP shank, large heads and a cross-cut pattern, for stock removal and rough shaping in the lab.
Ceramic-Bonded Diamond Grinding BursCeramic-bonded diamond grinding burs for grinding and shaping zirconia, lithium disilicate and ceramics in the lab.
Diamond Polishers for Zirconia and All-CeramicsDisc-shaped diamond polishers for zirconia, lithium disilicate and all-ceramic restorations in the lab.
Mounted SandpaperMounted sandpaper rolls for smoothing and finishing in the lab — the step between shaping with cutting tools and polishing.
Polishing BrushesPolishing brushes and wheels on mandrels for the last finishing steps in the lab — polishing, cleaning and bringing up the shine.
Hard Z CutterA ceramic cutter made of nano-grade zirconia for grinding, finishing and polishing ceramics, acrylic, resin and zirconia in the lab. The manufacturer lists these uses.
Lab Polishing Kit 3LR00.1A lab polishing kit in one stand: shaping tools, smoothing wheels, rubber polishers and felt wheels — from shaping to shine.
Zirconia & Ceramic Grinding and Polishing Kit 3Z00.1A lab grinding and polishing kit for zirconia and ceramic restorations, from shaping to shine, in one stand.
Zirconia Grinding and Polishing Kit 3Z00.3A compact grinding and polishing kit for zirconia restorations, with 11 tools in a stand numbered by work step. It holds diamond burs, a perforated diamond disc, grinders and polishing discs.
Zirconia Polishing & Grinding KitA six-step zirconia grinding and polishing kit, from soft pre-sintered zirconia to a mirror finish.
Ceramic Firing Paste (Peg Putty)A support paste for zirconia and ceramic restorations in the furnace — for sintering, crystallization, glazing and porcelain firings.
3D Scanning Developer PasteA lab scanning paste that creates an even matte surface on glossy or transparent materials. It lets the optical scanner capture them accurately for CAD/CAM design.
Casting Investment RingAn investment ring system for the lost-wax technique: a ring, a base with sprue former and a top former that shape the investment around the wax pattern for casting or ceramic pressing.
Soft Ceramic Firing PadA soft, round woven firing pad that veneers, crowns and ceramic restorations rest on during firing and sintering.
Disposable Alox Press PlungerA disposable aluminum oxide (Alox) plunger for the press furnace: it pushes the softened ceramic ingot into the mold cavity of the investment ring.
Ceramic Glaze & Stain BrushesA series of professional brushes for the ceramic lab, for applying glaze and stains and for fine contouring. They also serve for finishing crowns, veneers, inlays and onlays.
Press Plunger SeparatorA separating powder for ceramic pressing, applied to the plunger face to form a barrier between the plunger and the ingot in the press furnace.
Round Ceramic Sintering TrayA round sintering crucible of high-purity alumina (over 99.5% Al₂O₃) for sintering zirconia crowns and bridges in the sintering furnace.
Honeycomb Sintering Tray with Ceramic PinsA round honeycomb firing tray with ceramic pins, for holding crowns, bridges and zirconia restorations during porcelain firing and sintering. The tray is made of refractory material.
Examination kitA basic examination kit — mouth mirror, explorer and tweezers — the instruments that open every exam, routine treatment and restoration check.
Extracting Forceps — BlackExtraction forceps with a black finish, in beak patterns for teeth and roots in the upper and lower jaws.
Set of Tooth ForcepsA set of extraction forceps for routine extractions in both jaws — from the central incisors to the third molars, including root forceps.
Pediatric Extraction ForcepsPediatric extraction forceps for removing primary teeth and roots in the upper and lower jaws, smaller than adult forceps.
Root Elevator SetA set of root elevators for loosening a tooth or root from the periodontal ligament before extraction, and for lifting out roots and fragments.
LM-Arte Set, 5 pcsA set of five LM-Arte instruments for layering anterior composite restorations: placing, shaping and removing excess.
LM-Arte Set, 7 pcsA set of LM-Arte instruments for layering composite restorations: carrying, shaping, compacting, setting layer thickness and removing excess.
Gracey Curette SetA set of eight double-ended Gracey curettes for subgingival scaling and root planing — the full series from 1-2 to 15-16.
Composite Instrument KitA kit of double-ended instruments for direct composite build-up. It covers placing, condensing, anatomic shaping and margin smoothing in anterior and posterior restorations.
Sinus Lift KitA hand-instrument kit for sinus-lift surgery. Its double-ended membrane elevators separate the Schneiderian membrane from the sinus floor to make room for a bone graft in the posterior maxilla.
Micro-surgery KitAn oral microsurgery kit: fine instruments for cutting, tissue elevation and suturing under loupes or a microscope, arranged in a sterilization tray.
Micro Mirror KitA set of four micro mirrors, round and rectangular, for endodontic work under magnification: inside the access cavity and in apical microsurgery.
Double-Ended Surgical RetractorA flat, double-ended surgical retractor for holding the cheek, lip, tongue and mucoperiosteal flap away from the field in oral surgery.
Rubber Dam KitA rubber dam instrument kit for isolating the field: a punch, clamp forceps, a metal frame and clamps in different shapes, in an organized tray.
Oral Surgery KitAn oral surgery kit in a zippered case: retractors, an anesthetic syringe, scissors, tissue forceps, a scalpel handle and double-ended instruments.
Castroviejo Needle HolderA fine Castroviejo-type needle holder for precise suturing in periodontal surgery, microsurgery and soft-tissue grafting.
Mathieu Needle HolderA Mathieu needle holder with a palm grip and a handle-end ratchet, for intraoral suturing in oral surgery, extractions and periodontal surgery.
Needle HolderA classic ring-handled needle holder with a ratchet lock, for suturing and knot tying in oral surgery, implant surgery and periodontal surgery.
Manual Crown and Bridge RemoverA manual slide-hammer crown and bridge remover, for releasing cemented crowns, bridges and provisional restorations.
Automatic Crown RemoverA spring-loaded automatic crown remover that releases cemented crowns and bridges with a short impact in the direction of removal.
Anesthesia SyringeA metal dental cartridge (Carpule) syringe with three rings, for local anesthesia by infiltration and nerve block.
Surgical ScissorsFine surgical scissors with short, curved, sharp blades for cutting sutures, trimming soft tissue and shaping membranes and grafts in the mouth.
Blade HandleA flat scalpel handle that takes interchangeable disposable blades, used for incisions in oral surgery, implant surgery and periodontal surgery.
Tofflemire Matrix RetainerA Tofflemire matrix retainer for Class II restorations in posterior teeth. It tightens a matrix band around the tooth to form a temporary wall where one is missing.
Dental CondenserA double-ended condenser for packing amalgam and restorative material into the prepared cavity, with round faces in two sizes — one at each end.
Osseodensification Burs KitAn osseodensification bur kit — preparing the implant site by compacting bone instead of removing it.
M3 Pro Gold V.3A sequence of Gold CM NiTi rotary files for root canal shaping — from opening the canal orifice to apical finishing, including in curved canals. The six files are used in a fixed order; two of them, 12/.02 and 16/.02, have a variable taper.
M3 Pro Gold – Taper SystemA sequence of gold-plated NiTi rotary files in constant tapers — from 2% to 8% — for shaping root canals from the coronal third to the apex. The six files are used in a fixed order, in continuous rotation.
M3.RT (Retreatment)A three-file NiTi rotary sequence for retreatment: it removes gutta-percha and filling materials from the canal in stages, before reshaping. The files run in continuous rotation, each one reaching deeper than the last.
SuPliable BlueBlue NiTi rotary files for root canal shaping, especially in curved and complex canals.
M3-MAXA NiTi rotary file for final canal cleaning after shaping: it cleans the canal walls and apical region without changing the prepared shape.
Stainless Steel K-FilesStainless-steel hand K-files for locating and opening the canal, measuring working length and initial enlargement before NiTi files. The size range is wide — from a fine #6 up to #80.
Stainless Steel C-FilesStainless-steel hand C-files for creating a manual glide path and checking patency before NiTi files. The manufacturer recommends them especially for calcified canals.
E-FLEX GOLDA NiTi rotary file system with gold heat treatment, for shaping root canals in continuous rotation. The series includes a 17/08 orifice opener, a 19/02 glide path file, and 4% and 6% taper files in sizes 15–35.
E-FLEX BLUEA NiTi rotary file system with blue heat treatment, for shaping root canals in continuous rotation. The series includes a 17/08 orifice opener and 4% and 6% taper files in sizes 15–40.
V-TAPER GOLDA variable-taper NiTi rotary system for root canal shaping in continuous rotation: three shaping files (SX, S1, S2) and three finishing files (F1, F2, F3).
AF ROTARYA NiTi rotary file system in AF-H wire for shaping narrow, calcified and severely curved canals: an opening file, a path file and shaping files in one assorted box.
C-PATHNiTi rotary files for creating a glide path before the shaping files. After the canal is scouted with a size 10 K-file, they take the place of hand enlargement with K-files 10, 15 and 20.
AF BABYNiTi rotary files for root canal treatment of primary teeth: short 16 mm files plus a 10 mm opening file, used in continuous rotation.
AF MAXA NiTi cleaning and finishing file for the step after canal shaping: it helps remove the smear layer and dentin debris.
Irrigation NeedleA single-use needle for root canal irrigation, with a closed end and two side outlets — to deliver irrigant inside the canal.
Irrigation NeedleA root canal irrigation needle with two side vents and a closed, rounded tip, designed to irrigate the full length of the canal.
Silicone Endo File StoppersColored silicone stoppers for endodontic files, marking the working length on the file against the reference point on the tooth.
Double-Ended Endodontic PluggerA double-ended hand plugger for vertical compaction of gutta-percha during root canal obturation, with a different size at each end.
Micro-OpenerStainless-steel hand K-files on a long handle, for locating and opening canal orifices in posterior teeth when working under a microscope.
Micro-ShaperStainless-steel hand H-files (Hedström) on a long handle, for negotiating and enlarging canals in posterior teeth when working under a microscope.
PluggerA double-ended plugger for vertical compaction of gutta-percha: a slim nickel-titanium tip on one end and a larger stainless-steel tip on the other.
Hand File HolderA holder for hand files, with an angled head that clamps the file for comfortable work on posterior teeth and in hard-to-reach areas.
Endo Measuring BlockAn endo measuring block for setting the file stopper to working length quickly. It has 16 measuring holes numbered from 12 to 27 mm.
Endo BoxAn organizer box for endodontic hand files, with a lid and an inner tray with holes in columns by size — to store, sort and sterilize files together.
Endo Clean BoxA cleaning stand for endodontic files: a cup with a sponge into which the file is plunged between insertions to clear debris from the flutes.
White Endoseal Bioceramic Sealer 3 gA premixed calcium silicate-based bioceramic sealer in a ready-to-use syringe for permanent root canal obturation. Use it alone or with a gutta-percha master cone, injected gutta-percha or a core carrier.
CleaniCal 2 gA water-soluble calcium hydroxide paste in a ready-to-use syringe for intracanal dressing and temporary root canal filling. It is placed after removal of infected or necrotic pulp.
Endocem MTA Premixed Regular 2 gA premixed, injectable calcium silicate-based MTA for pulp capping, pulpotomy, root-end filling and perforation repair.
Gutta-Percha PointsGutta-percha points for filling the root canal after shaping, in 2%, 4% and 6% tapers — to match the taper of the finishing file.
Gutta-Percha PointsGutta-percha points for root canal obturation with a sealer, in 2%, 4% and 6% tapers and in cones matched to file systems.
Warm Gutta-Percha SticksGutta-percha sticks for warm root canal obturation: they are loaded into a backfill obturation gun and injected into the canal in a molten state.
Paper PointsAbsorbent paper points for drying the root canal after irrigation and before obturation, in 2%, 4% and 6% tapers — to match the prepared canal shape.
Paper PointsAbsorbent paper points for drying the root canal after irrigation and before obturation, in 2%, 4% and 6% tapers and in sizes matched to file systems.
E-Root GapSealA gap-sealing paste for rubber dam margins that needs no light curing. It is used to seal margins, assist restoration contouring and protect soft tissue from chemicals during treatment.
E-Root DamA light-cured resin gingival barrier (liquid dam) for protecting soft tissue and sealing rubber dam margins. It also protects tissue during whitening, air abrasion and etching, stabilizes matrix bands and supports the stamp technique.
E-Root SPA premixed magnesium-based bioceramic sealer for permanent root canal obturation. It comes in a syringe for direct injection into the canal and suits single-cone, lateral condensation and warm vertical compaction techniques.
E-Root BPA magnesium-based bioceramic root repair material for vital pulp therapy and endodontic repairs. Indications: direct and indirect pulp capping, pulpotomy, perforation and root resorption repair, root-end filling, and apical barrier (apexification).
Endo Training ToothA transparent, 3D-printed training tooth for root canal practice, with the canal system visible from every side. Filing, irrigation and obturation can be watched as they happen.
No matching products found.
Images are for illustration only.
Contact us
A site visit, measurements and an initial plan with a price range — no obligation.
Leave a detailed message
Even outside business hours — we will get back to you.